• S., Oluwadare B.
• Oginni, Olarewaju Thomas
• Adebayo, A.

Abstract

<jats:p>The performance and longevity of welded structures depend heavily on corrosion resistance, particularly when mild steel is used as the primary material. The paper provides an overview of the investigation of the influence of various welding techniques on the corrosion resistance of mild steel. The study combines mild steel specimens using spot-welding, gas metal arc, and electric arc welding techniques. Electrochemical and immersion testing techniques are used to assess the welded samples' resistance to corrosion. The impact of metal microstructure, welded zone surface characteristics, corrosion rates, and filler material selection on corrosion resistance is examined. The results demonstrate that the choice of welding process has a significant effect on mild steel corrosion resistance. Some techniques have a higher level of corrosion resistance owing to the use of heat. As exposure duration rises, both diluted and concentrated hydrochloric acids cause weight loss in the absence of an inhibitor. The temperature increased over time until 190 minutes, which resulted in a decrease in temperature efficiency. In the impact test, adding 3%, 6%, and 9% of the welded components to the metal alloy increased the impact's energy output from 12.32 J to 12.69 J, 12.99 J, and 13.51 J, respectively. The energy effect of the reinforced mild steel was reduced owing to the brittleness of the welded parts relative to the ductile metal matrix. The composite absorbs impact stresses, and the enhanced weight ratio of the welded mild steel thereby increases its toughness.</jats:p>

Topics

• impedance spectroscopy
• microstructure
• surface
• corrosion
• steel
• composite
• impact test