• Kryucheva, Kristina
• Putilova, Evgeniya

Abstract

<jats:p>The principle of symmetry is one of the general methodological principles of science. The effects of any external influences, such as deformation, stresses, temperature, etc., could lead to the anisotropy (asymmetry) of properties in constructional materials. During operation, metal structures and machine parts are exposed to time-varying external mechanical loads, which can cause changes in the metal structure, the initiation of cracks, and, as a result, the destruction of the product. The application of nondestructive testing methods prevents changes in the stress–strain state and, consequently, the destruction of the object. This article contains the results of studying the effects of elastic–plastic deformation by uniaxial tension and torsion on the change in the structure and magnetic parameters of low-alloy 13Cr-V pipe steel. Modern methods of metallography and magnetic nondestructive testing methods were used as part of this study. The results of the EBSD analysis showed that deformation during torsion, in contrast to uniaxial tension, is unevenly distributed over the sample cross section. In the cross section of the sample, the most severely deformed grains with a change in their geometry are observed near the surface; in the center, there is no change in geometry. During tension, the deformation over the cross section of the sample is uniformly distributed. Correlations between the applied normal and tangential stresses and magnetic characteristics of the 13Cr-V structural steel were determined. Informative parameters that could be used for the development of nondestructive testing methodologies for solving concrete tasks were determined. Different methods of deformation lead to diverse structural changes in grain structure.</jats:p>

Topics

• impedance spectroscopy
• surface
• polymer
• grain
• crack
• electron backscatter diffraction
• structural steel