• Heinrich, Stefan
• Rotter, Sonja
• Safdar, Wasif
• Orth, Maike
• Pietsch-Braune, Swantje
• Tasdemir, Süreyya
• Düster, Alexander

Abstract

<jats:p>When designing crash absorber particles for application as a filling material in the double-hull of ships, the main goal is to achieve an optimal mechanical performance, in combination with a low-density particle structure, while fulfilling several additional requirements regarding, for example, non-toxic and hydrophobic behavior. In this study, a fluidized bed was used to coat Poraver® glass particles with Candelilla wax and silicone to attain these specifications. A uniform coating was achieved with wax, but the process turned out to be far more challenging when using silicone. To evaluate the suitability of coated particles as a granular filling material, and to compare their performances with that of untreated Poraver® particles, several mechanical tests, as well as structural investigations, were conducted. While no notable improvement in mechanical behavior was observed on the single-particle level, bulk tests showed promising results regarding compressibility and abrasion resistance of coated particles compared to untreated ones.</jats:p>

Topics

• density
• impedance spectroscopy
• glass
• glass
• spray coating