• Kounbach, Said

Abstract

<jats:p>Fluosilicic acid is a by-product of the chemical phosphate industry, mainly during the manufacture of phosphoric acid and triple super phosphate (TSP). To ensure the accurate measurement of the H2SiF6 mass fraction in this by-product, method validation is required, which needs a certified reference material (CRM) with its traceability to the International System of Units (SI). This work describes the development of a certified reference material of fluosilicic acid, which is commercially unavailable. Details of all steps, such as sample preparation, homogeneity and stability studies, value assignment, establishment of metrological traceability, and uncertainty estimation of the certified reference material, are fully described. The H2SiF6 mass fraction in the CRM was quantified by two analytical methods, i.e., UV-VIS as a primary method of analysis and flame mode atomic absorption spectroscopy (AAS) as a second method. It is worth noting that the results obtained from each method were in good agreement. The CRM certified value and corresponding expanded uncertainty, obtained from the combined standard uncertainty multiplied by the coverage factor (k = 2), for a confidence interval of 95%, was (91.5 ± 11.7) g·kg−1. The shelf life of the developed CRM is determined to be 1 year, provided that storage conditions are ensured. The developed CRM can be applied to validate analytical methods, improve the accuracy of measurement data as well as to establish the meteorological traceability of analytical results.</jats:p>

Topics

• impedance spectroscopy
• atomic absorpion spectrometry