• Kalendova, Alena
• Kadlečková, Markéta
• Koutny, Marek
• Šašinková, Dagmar
• Fayyazbakhsh, Ahmad
• Julinova, Marketa

Abstract

<jats:p>In this experimental research, different types of essential oils (EOs) were blended with polyhydroxybutyrate (PHB) to study the influence of these additives on PHB degradation. The blends were developed by incorporating three terpenoids at two concentrations (1 and 3%). The mineralization rate obtained from CO2 released from each sample was the factor that defined biodegradation. Furthermore, scanning electron microscope (SEM), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA) were used in this research. The biodegradation percentages of PHB blended with 3% of eucalyptol, limonene, and thymol after 226 days were reached 66.4%, 73.3%, and 76.9%, respectively, while the rate for pure PHB was 100% after 198 days, and SEM images proved these results. Mechanical analysis of the samples showed that eucalyptol had the highest resistance level, even before the burial test. The other additives showed excellent mechanical properties although they had less mechanical strength than pure PHB after extrusion. The samples’ mechanical properties improved due to their crystallinity and decreased glass transition temperature (Tg). DSC results showed that blending terpenoids caused a reduction in Tg, which is evident in the DMA results, and a negligible reduction in melting point (Tm).</jats:p>

Topics

• impedance spectroscopy
• scanning electron microscopy
• extrusion
• glass
• glass
• laser emission spectroscopy
• strength
• thermogravimetry
• glass transition temperature
• differential scanning calorimetry
• crystallinity
• dynamic mechanical analysis