• Axente, Elena Roxana
• Nicoleta, Simionescu
• Bogatu, Nicoleta
• Benea, Lidia
• Celis, Jean-Pierre

Abstract

<jats:p>This paper presents novel results on the effects of the dispersion of titanium carbide nanoparticles (50 nm mean diameter) into a nickel-plating electrolyte on the corrosion behavior of the nanocomposite layers obtained. The Ni/nano-TiC layers are compared with pure nickel layers obtained at the same electrodeposition parameters with 60 mA·cm−2 current density and 10 min deposition time. The comparative corrosion performances are investigated using a three-electrode electrochemical cell in a solution (mixed boric acid with lithium hydroxide), which simulates the primary water circuit of pressurized water reactors (PWRs). Open circuit potential measurement and electrochemical impedance spectroscopy were employed as the electrochemical methods, using an electrochemical workstation connected to an electrochemical cell, as well as a PC with software to drive the experimental work. The results clearly revealed enhanced corrosion properties for the Ni/nano-TiC hybrid layers as compared to the pure Ni layers. The significantly improved corrosion behavior can be attributed to the TiC nanoparticles embedded into the Ni matrix, which have the effect of insulating centers at the composite layer/corrosive solution interface.</jats:p>

Topics

• nanoparticle
• nanocomposite
• density
• impedance spectroscopy
• dispersion
• nickel
• corrosion
• carbide
• titanium
• Lithium
• current density
• electrodeposition