• Auriga, Radosław
• Trociński, Adrian
• Auriga, Alicja
• Wilkowski, Jacek
• Borysiuk, Piotr

Abstract

<jats:p>Wood–plastic composites (WPCs) increase the range of applications of materials by creating new material solutions. As part of this research, PLA (polylactic acid)- and HDPE (high-density polyethylene)-based composites were manufactured. Softwood sawdust or conifer bark with different sizes (large and small) were used as filler. In selected cases, the addition of 3% additives, such as calcium oxide in the case of PLA or polyethylene-graft-maleic anhydride in the case of HDPE, were tested. The manufactured composites were examined for their density profile and their susceptibility to drilling, defined by the value of the axial force occurring during drilling. The obtained results revealed that the type of matrix had the greatest influence on the axial forces during drilling. Regardless of the composite formulation, composites based on PLA had 25% to 56% higher axial forces during drilling than those based on HDPE. Furthermore, increasing the proportion of lignocellulosic fillers resulted in a decrease in the value of axial forces during drilling, with PLA composites experiencing a greater decrease than HDPE composites. The type and size of the filler had a minor impact on the axial force values during drilling. The statistical analysis indicated that the additives had a greater influence on HDPE than on PLA.</jats:p>

Topics

• density
• polymer
• composite
• Calcium
• wood
• susceptibility