• Rosendo, Enrique
• Coyopol, Antonio
• Novelo, Carolina Tabasco
• García, Iván
• Arias, Iván Oliva
• Romano-Trujillo, Roman
• Morales-Ruiz, Crisóforo
• Silva-González, Rutilo
• García-Salgado, Godofredo

Abstract

<jats:p>Copper oxide (CuO) films were deposited onto glass substrates by the microwave assisted chemical bath deposition method, and varying the pH of the solution. The pH range was varied from 11.0 to 13.5, and the effects on the film properties were studied. An analytical study of the precursor solution was proposed to describe and understand the chemical reaction mechanisms that take place in the chemical bath at certain pH to produce the CuO film. A series of experiments were performed by varying the parameters of the analytical model from which the CuO films were obtained. The crystalline structure of the CuO films was studied using X-ray diffraction, while the surface morphology, chemical composition, and optical band-gap energy were analyzed by scanning electron microscopy, X-ray photoelectron spectroscopy, and UV–Vis spectrophotometry, respectively. The CuO films obtained exhibited a monoclinic crystalline phase, nanostructured surface morphology, stoichiometric Cu/O ratio of 50/50 at%, and band-gap energy value of 1.2 eV.</jats:p>

Topics

• Deposition
• surface
• scanning electron microscopy
• x-ray diffraction
• experiment
• x-ray photoelectron spectroscopy
• crystalline phase
• glass
• glass
• chemical composition
• copper
• spectrophotometry