• Can, Ahmet
• Lis, Barbara
• Krystofiak, Tomasz

Abstract

<jats:p>Heat treatment is an eco-friendly and efficient way to improve the defective properties of wood, such as its hygroscopic nature, the lack of dimensional stability, and low resistance against biological degradation, and to produce a green and sustainable wood material for construction and buildings. However, these treatments alter the substrates and could influence the performance of the coating products necessary to maintain the surface features in certain end-use sectors. In this study, the effects of heat treatment in air (HT) and under vacuum (VHT) on the surface properties of Scots pine (Pinus sylvestris L.) and poplar (Populus euramericana) wood were investigated. For this purpose, the samples were exposed to an artificial aging process. After the aging process, surface roughness and the adhesion strength behavior of the samples were measured. After the HT and VHT, poplar and pine wood samples showed different roughness. While the roughness value parallel to the fibers decreased in poplar wood, it increased in pine wood. The roughness value perpendicular to the fibers increased in both tree species. The maximum roughness value after UV aging was 62,622 in the VHT-200 group. Although with the UV ageing treatment, the adhesion strength was decreased in the samples heat treated in air, it was increased in the samples subjected to vacuum heat treatment. A lower loss of adhesion strength was observed in the heat-treated samples processed under vacuum compared to the heat-treated samples processed in air.</jats:p>

Topics

• impedance spectroscopy
• surface
• strength
• aging
• wood
• aging