• Shabbir, Samreen
• Ali, Tariq
• Buller, Abdul Salam
• Lashari, Ali Raza
• Hussain, Ghulam
• Ahmed, Zaheer

Abstract

<jats:p>Cement production produces a high amount of carbon dioxide, which has a negative impact on the environment. By utilizing waste products instead of cement, environmental degradation can be reduced. The current study was undertaken to study the mechanical and durability performance of concrete by replacing 7.5%, 10%, and 12.5% silica fume (SF) of cement weight. Additionally, coal bottom ash (CBA) was also substituted as fine aggregates with 10%, 20%, and 30%. Compressive strength and indirect tensile strength were the major parameters regarding mechanical properties, while corrosion analysis and sulfate attack were set for durability performance. Sixteen mixes were prepared including a control mix. Out of these, three mixes contained SF, three mixes contained CBA, and eight mixes contained both SF and CBA with 1:2:4 ratio at 0.5 w/b ratio. The results concluded that the addition of 12.5% SF and 30% CBA gives optimum compressive strength and tensile strength. Furthermore, using the SF and CBA reduces the workability of concrete. Furthermore, the use of these byproducts increased the durability in terms of corrosion and sulfate attack.</jats:p>

Topics

• Carbon
• corrosion
• strength
• cement
• tensile strength
• durability