• Rajkumar, S.
• Sharma, Shubham
• Makki, Emad
• Sathish, Thanikodi
• Patil, Shashwath
• Prabhudev, M. S.
• Kumar, Abhinav
• Rao, P. S.
• Abbas, Mohamed
• Vijayan, V.

Abstract

<jats:p><jats:bold>Introduction:</jats:bold> Among alloys of medium-carbon and high-strength steel, EN 24 steel is characterised by its nickel-chromium-molybdenum composition. EN 24 steel is highly suitable for application in heavy-duty projects due to its notable resilience to damage, especially when exposed to low temperatures. With the objective of minimising surface irregularities, this research endeavours to enhance the milling process of EN 24 steel by employing coated tungsten carbide (WC) tool inserts.</jats:p><jats:p><jats:bold>Methods:</jats:bold> Feed rate, cutting speed, depth of cut, and cutting fluid are all crucial process factors in the experimental investigation. Four distinct levels are applied to each factor. The research utilises the Design of Experiments (DOE)-based Central Composite Design of Response Surface Methodology. To predict output parameters, mathematical models are developed utilising analysis of variance (ANOVA) for optimisation purposes.</jats:p><jats:p><jats:bold>Results and discussions:</jats:bold> Through the utilisation of multi-objective optimisation, the optimal combination for tungsten carbide inserts was determined, which provided surface irregularities of 0.301 µm. Cutting speed (CS) of 149.507 m/min, feed rate (FR) of 340.27 mm/min, depth of cut (DOC) of 0.599 mm, and cutting fluid (CF) of 12.50 L/min are the optimal parameters. The surface morphologies of the machined workpiece at particular parameter values can be discerned through scanning electron microscope (SEM) analysis, yielding significant insights. The optimal parameters that have been identified provide practical recommendations for improving the milling method of EN 24 steel when tungsten carbide inserts are utilised. Understanding the milling process in its entirety is facilitated by SEM analysis of surface morphologies and microstructures under particular cutting conditions. The morphology and surface irregularities of the machined workpiece are evaluated using profilometry, which provides additional insight into surface integrity. The discourse investigates the potential applications and implications of the results, as well as suggests directions for further study concerning the enhancement of milling processes for similar steel alloys.</jats:p>

Topics

• impedance spectroscopy
• microstructure
• morphology
• surface
• molybdenum
• Carbon
• nickel
• chromium
• scanning electron microscopy
• experiment
• grinding
• milling
• strength
• carbide
• steel
• composite
• tungsten
• profilometry