• Donate, Ricardo

Abstract

<jats:title>Abstract</jats:title><jats:p>Disadvantages in the use of polylactic acid (PLA) as a base material for Tissue Engineering applications include the low osteoconductivity of this biomaterial, its acidic degradation and the deficient cellular adhesion on its surface. In order to counteract these drawbacks, calcium carbonate (CaCO<jats:sub>3</jats:sub>) and <jats:italic>β</jats:italic>-tricalcium phosphate (Ca<jats:sub>3</jats:sub>(PO4)<jats:sub>2</jats:sub>, <jats:italic>β</jats:italic>-TCP) were proposed in this work as additives of PLA-based support structures. Composite scaffolds (PLA:CaCO<jats:sub>3</jats:sub>: <jats:italic>β</jats:italic>-TCP 95:2.5:2.5) manufactured by fused deposition modeling (FDM) were tested under enzymatic degradation using <jats:italic>proteinase K</jats:italic> enzymes to assess the modification of their properties in comparison with neat PLA scaffolds. The samples were characterized before and after the degradation test by optical microscopy, scanning electron microscopy, compression testing and thermogravimetric and calorimetric analysis. According to the results, the combination of the PLA matrix with the proposed additives increases the degradation rate of the 3D printed scaffolds, which is an advantage for the application of the composite scaffold in the field of Tissue Engineering. The higher degradation rate of the composite scaffolds could be explained by the release of the additive particles and the statistically higher microporosity of these samples compared to the neat PLA ones.</jats:p>

Topics

• Deposition
• impedance spectroscopy
• surface
• scanning electron microscopy
• composite
• Calcium
• optical microscopy