• Sinmazcelik, Tamer
• Erturk, Alpay Tamer
• Guven, E. Asım
• Vatansever, Fahri
• Yarar, Eser

Abstract

<jats:p> The present work deals with temperature effects and parametric optimization in the drilling of continuous glass fiber reinforced epoxy composite. Drilling ability was examined operating a drilling system with different drill bits, feed rate, and spindle speed parameters. The investigation was performed by changing the tool and composite interface. Drilling experiments were carried out under the dry condition. Thrust force and drilling temperatures were measured using dynamometer and thermal camera. Peel-up and push-out delamination were evaluated using an image analyzing tool. Results show that the tribo-mechanical behavior of the drilling operation is affected at different levels by tool coating. This behavior is related to the intrinsic friction properties of coating nature. Response surface methodology was used in the evaluation of experiment results. The feed rate of 0.13 mm/rev, spindle speed of 2425 rpm and HSS-TiN drill bit are found as an optimum drilling parameters and drill type. </jats:p>

Topics

• impedance spectroscopy
• surface
• experiment
• glass
• glass
• composite
• tin
• high speed steel