• Mosselmans, J. Frederick W.
• Rayment, Trevor
• Vila-Comamal, Joan
• Davenport, Alison J.
• Amri, Mahrez
• Street, Steven R.
• Rau, Christoph
• Xu, Weichen
• Glanvill, Sarah J. M.
• Quinn, Paul D.
• Guo, Liya

Abstract

<p>Current oscillations were observed during one-dimensional pitting corrosion of 304 L stainless steel in neutral 1 M NaCl solutions with varying NaNO₃ concentrations. Synchrotron X-ray diffraction was used to identify the salt layer at the corrosion front. It was found that, although current oscillations were induced in solutions with higher concentrations of NaNO₃, the salt species in the pit did not change and a nitrate-free salt was present in all solutions. At higher NaNO₃ concentrations, a change of salt crystal morphology was detected. Electrochemical oscillations were seen to coincide with secondary pitting on the pit surface indicating that two corrosion regimes were operating in parallel. Synchrotron radiography was used on artificial pits to measure the change in corrosion front and material loss in situ. Before nitrate was added, the corrosion front showed non-uniform material loss across the interface when beneath the salt layer. Nitrate addition induced a local region of passivation that propagated across the pit surface. Surface roughness was quantified using R-values and seen to vary without a clear trend until passivation, after which it stayed constant. A mechanism is suggested in which partial passivation occurs in these systems, where passivated areas are undercut as the corrosion front moves, generating surges in current.</p>

Topics

• impedance spectroscopy
• surface
• stainless steel
• x-ray diffraction
• pitting corrosion
• one-dimensional