• Felling, Forest
• Gonzalez, Mario
• Dale, Olivia

Abstract

<jats:p>A direct oxide reduction (DOR) process is used to reduce PuO<jats:sub>2</jats:sub> to Pu metal via Ca metal. Molten CaCl<jats:sub>2</jats:sub> is commonly used as the electrolyte for this reaction. As the DOR reaction proceeds, CaO accumulates in the salt and must be measured in real-time to know when the reaction has gone to completion. Open circuit potential (OCP) was measured in this study between a reference electrode consisting of Ni/NiO contained in a MgO tube and a tungsten working electrode. Two methods of CaO additions were performed over several experiments, and both methods correlated to a 0.11 to 0.23 V decrease in OCP up to 14.4 wt% CaO. CaO concentrations were separately measured via sampling and acid-base titration. A plot of OCP versus concentration of CaO fits the Nernst equation with the CaO powder additions up to 5.2 wt% and also at the higher end of the CaO pellet concentration range. While the MgO tubes were observed to be structurally stable in the molten salt, scanning electron microscopy and energy dispersive X-ray spectroscopy showed that Mg in the tubes had been partially replaced with Ca.</jats:p>

Topics

• impedance spectroscopy
• scanning electron microscopy
• experiment
• tungsten
• X-ray spectroscopy
• acid-base titration