• Laakso, Jarmo
• Puranen, Jouni
• Hyvärinen, Leo
• Kylmälahti, Mikko
• Vuoristo, Petri

Abstract

<p>MnCo₂O₄ spinel coatings are designed to be used on metallic interconnectors in SOFC devises to decrease oxidation rate of the metallic interconnect and to prevent the evaporation of harmful CrO₃ and Cr₂(OH)₂ compounds. These Cr-compounds degrade the long-term performance of the SOFC by migrating to the triple phase barrier (TPB) of the cathode and reduce back to Cr₂O₃. MnCo₂O₄ spinel coatings, used in this study, were manufactured by using a novel solution precursor plasma spray (SPPS) process and heat treated in oxidizing environment. Deionized water based solutions of Mn(NO₃)₃•4H₃O and Co(NO₃)₂•6H₂O were used as a feedstock material. Concentration of the metal cations in the solutions was adjusted to 3 M. Ferritic stainless grade Crofer 22 APU with the thickness of 0.5 mm and surface roughness of R_a &lt;0.5 μm was used as a substrate material. The coatings were manufactured using a Sulzer Metco A3000S plasma spray system with F4-MB plasma gun with modified solution feeding hardware. Coatings with different microstructures were sprayed using different spraying parameters, e.g. the type of plasma gases used. The as-sprayed coatings were aged at 700 °C for 500 h in oxidizing environment, in order to study the stability of the coating, the growth of the Cr-scale and the Cr-transport through the spinel coatings. The microstructural characterization for the as-sprayed and the oxidized coatings were done using a field-emission scanning electron microscopy (FESEM) with SE-mode. The quantitative analyses were executed with energy dispersive spectroscopy (EDS), and in addition X-ray diffraction (XRD) was used for qualitative studies. The coatings with various microstructures were sprayed. The densest microstructure was sprayed using Ar-He plasma gas. Also the crystallographic equivalence for MnCo₂O₄ was achieved when Ar-He plasma was used with 40 mm spraying distance. Ageing caused the increase in structural porosity. On the interface between the coating and the interconnect, a dense spinel layer was formed which effectively prevented the Cr-transport forming approximately 500 nm thick Cr-rich sub-scale.</p>

Topics

• surface
• compound
• phase
• x-ray diffraction
• forming
• aging
• Energy-dispersive X-ray spectroscopy
• porosity
• evaporation
• field-emission scanning electron microscopy