• Loi, Gabriela
• Aymerich, Francesco
• Uras, Nicola
• Porcu, Maria Cristina

Abstract

Composite materials provide many advantages over more conventional materials. However, their susceptibility to impact damage can question their use in critical load-bearing structures, and efficient methods are needed for early damage detection. To this purpose, the nonlinear vibro-acoustic modulation (VAM) technique applies a low-frequency pump excitation and a high-frequency probe excitation to exploit the onset of harmonic components around the probe frequency of the damaged structural response. The VAM technique has been widely studied on structures instrumented with piezoceramic transducers used for both actuation and sensing, but few attempts have been made to use equipment typical of modal testing, such as shakers and accelerometers. In this study, the VAM technique is applied to a composite laminate beam by employing an electro-dynamic shaker to generate low-frequency flexural excitation, a low-profile piezoceramic transducer to introduce the probe wave, and a micro-accelerometer to sense the structural response. Three resonance low frequencies and two acoustic frequencies are considered in different testing scenarios, at increasing levels of excitation amplitude. The results show a general good performance of the technique with the adopted experimental setup, the choice of the probe frequency and the higher level of the pump excitation having a significant impact on its sensitivity.

Topics

• impedance spectroscopy
• composite
• susceptibility