• Hamed, Aya
• Magdy, Germein
• Noman, Sara
• Salama, Mahmoud
• Shehata, Nader
• Kandas, Ishac

Abstract

Tremendous research efforts have been directed toward developing polymer-based piezoelectric nanogenerators (PENG) in a promising step to investigate self-charging powered systems (SCPSs) and consequently, support the need for flexible, intelligent, and ultra-compact wearable electronic devices. In our work, electrospun polyvinylidene fluoride (PVDF) nanofiber mats were investigated while graphene oxide (GO) was added with different concentrations (from 0 to 3 wt.%). Sonication treatment was introduced for 5 min to GO nanosheets before combined PVDF solution. A comprehensive study was conducted to examine the GO incremental effect. Microstructural and mechanical properties were examined using a scanning electron microscope (SEM) and a texture analyzer. Moreover, piezoelectric properties were assessed via various tests including impulse response, frequency effect, d33 coefficient, charging and discharging analysis, and sawyer tower circuit. Experimental results indicate that incorporation of GO nanosheets enhances piezoelectric properties for all concentrations, which was linked to the increase in β phase inside the nanofibers, which has a significant potential of enhancing nanogenerator performance. PVDF-GO 1.5 wt.% shows a notably higher enhancing effect where the electroactive β-phase and γ-phase are recorded to be boosted to ~ 68.13%, as well as piezoelectric coefficient (d33 ~ 55.57 pC/N). Furthermore, increasing impact force encouraged the output voltage. Also noted that the delivered open circuit voltage is ~ 3671 V/g and the power density is ~ 150 µw/cm2. It was observed that GO of concentration 1.5 wt.% recorded a conversion efficiency of ~ 74.73%. All results are in line, showing better performance for PVDF-GO 1.5 wt.% for almost all concentrations.

Topics

• density
• impedance spectroscopy
• polymer
• phase
• scanning electron microscopy
• texture