• Zarei, Alireza
• Pilla, Srikanth
• Lukasiewicz, Rob
• Driscoll, John
• Pradeep, Sai Aditya

Abstract

<jats:title>Abstract</jats:title><jats:p>In the present work, polymeric cages with 18 different pocket geometries are developed to investigate the effects of geometrical parameters and material properties on the amount of roller push-out force. An experimental setup including a specialized injection molding tool is designed and fabricated and three sets of polymeric cages are manufactured using the selected materials (PA46, PA66, PPA). Force measurements are carried out five times on each pocket and three cages for each material are tested. Considering three different materials, a total of 810 force measurements are performed. A theoretical model is developed to predict the roller push-out forces in polymeric cages with different materials and pocket geometries. The model is developed by estimating the deformed region of the cage as a cantilever beam with a parabolic profile. An empirical coefficient is reposed in the model to compensate for the assumptions applied to the model. Experimental results showed that a fixed coefficient gives accurate results for all the geometries and materials, which confirms the validity of the approach adopted in this paper for modeling such problems. Considering the geometrical and material tolerances, force limits predicted by the model cover all the forces measured for a specific pocket with excellent accuracy and consistency.</jats:p>

Topics

• impedance spectroscopy
• injection molding