• Drinkwater, Bw
• Hughes, Robert R.

Abstract

Accurate characterisation of small defects remains a challenge in non-destructive testing (NDT).In this paper, a principle-component parametric-manifold mapping approach is applied to single-frequency eddy-current defect characterisation problems for surface breaking defects in a planar half-space.A broad 1-8 MHz frequency-range FE-circuit model & calibration approach is developed & validated to simulate eddy-current scans of surface-breaking notch defects.This model is used to generate parametric defect databases for surface breaking defects in an aluminium planar half-space and defect characterisation of experimental measurements performed.Parametric-manifold mapping was conducted in N-dimensional principle component space, reducing the dimensionality of the characterisation problem. In a study characterising slot depth, the model & characterisation approach is shown to accurately invert the depth with comparable accuracy to an equivalent peak amplitude-phase inversion method.The approach is used to characterise the depth of a sloped slot demonstrating good accuracy up to ~2.0 mm$ in depth over a broad range of frequencies, indicating applications in geometric feature inversion. Finally the technique is applied to finite rectangular notch defects of surface extents smaller than the diameter of the inspection coil (sub-aperture) over a range of sub-resonant frequencies. The results highlight the limitations in characterising these defects and indicate how the inherent modelling uncertainty around resonance can severely limit characterisation at these frequencies.

Topics

• impedance spectroscopy
• surface
• phase
• aluminium
• defect