• Dobie, Gordon
• Galbraith, Walter
• Gachagan, Anthony
• Foster, Euan
• Vasilev, Momchil
• Javadi, Yashar
• Macleod, Charles N.
• Pierce, Stephen

Abstract

Joining of metal structures, or welding, plays a critical role in our modern world, where safety critical welds of thin sheet metals are used in pipework,nuclear cannisters and aircraft ducting among others. A potential failure in such welds could prove to be catastrophic, hence the need for thorough inspection and testing. With the ever-increasing automation of welding operations, manually deployed Non-destructive Evaluation (NDE) has become a major bottleneck in the supply chain. This paper introduces for the first time, non-contact gas-coupled ultrasonic sensors deployed in-process during weld deposition, for screening of weld penetration directly at the point of manufacture. 3mm thick mild steel plates were butt-welded together using Gas Tungsten Arc Welding (GTAW) while non-contact air-coupled ultrasonic transducers, generating surface guided Lamb waves, performed inspection screening of the weld seam. Optimised Signal-to-Noise Ratio (SNR) was achieved through a customised acoustic matching layer, low-noise amplifiers and real-time signal processing. By performing multiple trials at varying levels of welding input power (0.59 kJ/mm to 1.03 kJ/mm), it was demonstrated that the amplitude of the through transmission A0 Lamb wave is correlated to the Weld Penetration Depth (WPD) and can be used for on-line weld quality screening. Advantages of the outlined method include higher production rates, reduced levels of scrap and higher production quality in regards to thin metal sheet welded components.

Topics

• Deposition
• impedance spectroscopy
• surface
• steel
• ultrasonic
• tungsten
• joining