• Álvarez-García, Ana
• Pereira, Mercedes
• López-Beceiro, Jorge
• Díaz-Díaz, Ana-María
• Artiaga, Ramón
• Vázquez, Laura

Abstract

<jats:title>Abstract</jats:title><jats:p>The current technology for curing high-performance composites, such as those used in industries like such as aeronautics and the automotive industry, is based on the use of autoclaves, where the material is cured by external heating, in large ovens. This type of curing requires enormous amounts of energy, of which only a small part is invested in the actual curing of the material, and the rest is mainly used for heating and maintaining the temperature of the autoclave. An alternative method that entails a lower energy cost compared to the traditional methodology is curing through the Joule effect, in which an electric current is passed through the material, so that it acquires temperature from the inside due to the passage of current through the carbon fibres, triggering and accelerating the curing process of the composite. While Joule curing may provide a much more efficient and faster curing, a control technology is needed to ensure that temperatures all throughout the composite match the temperature programme. In this work, a procedure has been developed to control the Joule effect curing of carbon fibre/epoxy composites in order to compare, by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA), the curing obtained by this method with that obtained by the traditional oven curing method.</jats:p>

Topics

• impedance spectroscopy
• Carbon
• composite
• differential scanning calorimetry
• curing
• dynamic mechanical analysis