• Grobert, N.
• Bando, Y.
• Terrones, M.
• Tang, C. C.
• Reyes-Reyes, M.
• Dong, Z. C.
• Uemura, Y.
• Terrones, H.
• Dorozhkin, P. S.

Abstract

<p>Transport and field-emission properties of assynthesized CN_x and BNC_x (x &lt; 0.1) multi-walled nanotubes were compared in detail. Individual ropes made of these nanotubes and macrofilms of those were tested. Before measurements, the nanotubes were thoroughly characterized using high-resolution and energy-filtered electron microscopy, electron diffraction and electron-energy-loss spectroscopy. Individual ropes composed of dozens of CN_x nanotubes displayed well-defined metallic behavior and low resistivities of ∼ 10-100 kΩ or less at room temperature, whereas those made of BNC_x nanotubes exhibited semiconducting properties and high resistivities of ∼ 50-300 MΩ. Both types of ropes revealed good field-emission properties with emitting currents per rope reaching ∼ 4 μA (CN_x) and ∼ 2 μA (BNC_x), albeit the latter ropes severely deteriorated during the field emission. Macrofilms made of randomly oriented CN_x or BNC_x nanotubes displayed low and similar turn-on fields of ∼ 2-3 V/μm. 3 mA/cm² (BNC_x) and 5.5 mA/cm² (CN_x) current densities were reached at 5.5 V/μm macroscopic fields. At a current density of 0.2-0.4 mA/cm² both types of compound nanotubes exhibited equally good emission stability over tens of minutes; by contrast, on increasing the current density to 0.2-0.4 A/cm², only CN_x films continued to emit steadily, while the field emission from BNC_x nanotube films was prone to fast degradation within several tens of seconds, likely due to arcing and/or resistive heating.</p>

Topics

• density
• compound
• nanotube
• electron diffraction
• laser emission spectroscopy
• electron microscopy
• current density