• Gokhale, Amol
• Mishra, Sushil K.
• Kömi, Jukka
• Ghosh, Sumit
• Pallaspuro, Sakari
• Kumar, Gaurav
• Somani, Mahesh C.

Abstract

<jats:p>A clear understanding of strain‐induced martensitic transformation of filmy retained austenite (RA) near stable cracks is required. Literature shows RA transformation during fatigue crack growth (FCG) in steels containing blocky but not film‐like RA, as the latter is known to resist strain‐induced phase transformation. This work investigates the transformation in 0.2% C steel processed by direct quenching and partitioning (DQP) containing filmy and a small vol% of blocky RA and compares it with RA‐free direct quenched (DQ) steel. While the DQ steel is lath‐martensitic, DQP steel has 8.5 vol% film‐like RA evenly distributed between martensite laths. The experimental FCG rates are comparable for both steels in the lowregime but increasingly differing in the Paris regime, the Paris law exponent being lower for DQP (<jats:italic>n</jats:italic> = 2.1) compared to DQ (<jats:italic>n</jats:italic> = 2.5), confirming that resistance to FCG is dependent on the stress intensity range (). Moreover, RA content near crack surface decreases during crack growth from 7.5 vol% atof 25 MPa√m to 2.3 vol% atof 54 MPa√m. Results show that higher the stress intensity range in steels with film‐like RA, the higher the degree of RA transformation and more suppression of FCG rate.</jats:p>

Topics

• impedance spectroscopy
• surface
• phase
• crack
• steel
• fatigue
• quenching