• Schwarz, R.
• Martin, F.
• Ayouchi, R.
• Casteleiro, C.
• Barrado, Jr

Abstract

Titanium dioxide (TiO(2)) is known to have three different kinds of polymorphous crystalline forms: rutile, anatase, and brookite. The rutile phase is always formed at higher temperatures, while the anatase phase is formed at lower temperatures and transformed into rutile phase above 800 degrees C. Various deposition techniques have been developed for depositing TiO(2) thin films, including evaporation, sputtering, chemical vapour deposition and thermal oxidation of titanium. Among them, the Chemical Spray Pyrolysis (CSP) technique has many advantages, such as good conformal coverage, the possibility of epitaxial growth and the application to large area deposition. Also, this method is low cost and it is easy to control the deposition growth parameters. In the present work, TiO(2) thin films have been deposited on p-Si (001) and fused silica substrates by Chemical Spray Pyrolysis (CSP) method from aqueous solution containing titanium (IV) isopropoxide (Ti[OCH(CH(3))(2)](4). As-deposited thin films show anatase polycrystalline structure, and rutile phase formed for films annealed at 750 degrees C. SEM images have confirmed a smooth and crack-free surface with low surface roughness. X-ray photoelectron spectroscopy (XPS) combined with 4 keV Ar(+) depth profiling has shown that crystallized films correspond to TiO(2). Residual carbon coming from the organic precursor solution is only detected at the surface of the film. Thin films deposited on fused silica were highly transparent (more than 85 %), with an indirect optical band gap of 3,43 and 3,33 eV for as-deposited and annealed films, respectively, and refractive indexes in the range between 2.01-2.29. Spectroscopic Ellipsometry (SE) also has been used to extract optical parameters. SE data fitted to triple-layer physical model revealed the same tendency to increase refractive index in annealed films. (C) 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Topics

• Deposition
• impedance spectroscopy
• surface
• Carbon
• phase
• scanning electron microscopy
• thin film
• x-ray photoelectron spectroscopy
• crack
• ellipsometry
• titanium
• evaporation
• spray pyrolysis