People | Locations | Statistics |
---|---|---|
Ferrari, A. |
| |
Schimpf, Christian |
| |
Dunser, M. |
| |
Thomas, Eric |
| |
Gecse, Zoltan |
| |
Tsrunchev, Peter |
| |
Della Ricca, Giuseppe |
| |
Cios, Grzegorz |
| |
Hohlmann, Marcus |
| |
Dudarev, A. |
| |
Mascagna, V. |
| |
Santimaria, Marco |
| |
Poudyal, Nabin |
| |
Piozzi, Antonella |
| |
Mørtsell, Eva Anne |
| |
Jin, S. |
| |
Noel, Cédric |
| |
Fino, Paolo |
| |
Mailley, Pascal |
| |
Meyer, Ernst |
| |
Zhang, Qi |
| |
Pfattner, Raphael | Brussels |
|
Kooi, Bart J. |
| |
Babuji, Adara |
| |
Pauporte, Thierry |
|
Akkerman, Remko
Newcastle University
in Cooperation with on an Cooperation-Score of 37%
Topics
Publications (393/393 displayed)
- 2023Friction screw extrusion additive manufacturing of an Al-Mg-Si alloycitations
- 2023Determination of the anisotropic electrical conductivity of carbon fabric reinforced composites by the six-probe methodcitations
- 2023Modeling of yarn interactions for non-axisymmetric biaxial overbraiding simulations
- 2023Experimental setup and method for the characterization of ply-ply adhesion for fiber-reinforced thermoplastics in melt
- 2023Microbubble on fiber method to determine the contact angle between steel substrates and highly viscous molten PEKK and PA 6
- 2023Vacuum-bag-only consolidation of C/PEKK fiber placed preforms with engineered gas evacuation channelscitations
- 2023Fatigue lifetime prediction model for leading edge protection coating systems of wind turbine blades
- 2023Modeling the effect of temperature and pressure on the peak and steady-state ply–ply friction response for UD C/PAEK tapes
- 2023An experimental study on the role of different void removal mechanisms in VBO processing of advanced thermoplastic compositescitations
- 2023A Feasibility Study on Friction Screw Extrusion Additive Manufacturing of AA6060citations
- 2023Corrigendum to “Prediction of the peak and steady-state ply–ply friction response for UD C/PAEK tapes” [Compos. Part A
- 2023Liquid droplet impact pressure on (elastic) solids for prediction of rain erosion loads on wind turbine bladescitations
- 2023In-plane deformation measurements for validation of composite forming simulations
- 2023Stress analysis of bias extension specimens
- 2023Designer Adhesives for Tough and Durable Interfaces in High-Performance Ti-Carbon PEKK Hybrid Jointscitations
- 2023Rain droplet impact stress analysis for leading edge protection coating systems for wind turbine blades
- 2022The Springer Model for Lifetime Prediction of Wind Turbine Blade Leading Edge Protection Systems: A Review and Sensitivity Studycitations
- 2022Advances in composite forming through 25 years of ESAFORMcitations
- 2022Forming simulations for unidirectional thermoplastic composites: Improvements in characterizing, modelling and validating in-plane shear
- 2022Thermoplastic stamp forming
- 2022Yarn interaction in an enhanced kinematic model of the triaxial overbraiding process
- 2022Prediction of the peak and steady-state ply–ply friction response for UD C/PAEK tapescitations
- 2022Induction Heating of UD C/PAEK
- 2022Characterization of the water–titanium interaction and its effect on the adhesion of titanium-C/PEKK jointscitations
- 2022Advances in composite forming through 25 years of ESAFORMcitations
- 2022Coating stress analysis for leading edge protection systems for wind turbine blades
- 2022Characterisation of Orthotropic Electrical Conductivity of Unidirectional C/PAEK Thermoplastic Composites
- 2022A feasibility study on friction screw extrusion additive manufacturing of AA6060
- 2022Experimental and numerical investigation of frictional behavior of carbon yarns for over-braiding conditions
- 2022Process- and material-induced heterogeneities in recycled thermoplastic compositescitations
- 2022The role of process induced polymer morphology on the fracture toughness of titanium-PEKK interfacescitations
- 2022From no-slip to full slip in the matrix-fiber interface: a state-rate approach
- 2022Modelling of Recycled Fibre-Reinforced Polymer Composites
- 2022Formability Experiments for Unidirectional Thermoplastic Compositescitations
- 2022Experimental Investigation of the Interlaminar Failure of Glass/Elium® Thermoplastic Composites Manufactured With Different Processing Temperaturescitations
- 2022The relation between in-plane fiber waviness severity and first ply failure in thermoplastic composite laminatescitations
- 2022Bending behaviour of thermoplastic composites in meltcitations
- 2022In-Plane Shear Characterization of Unidirectional Fiber Reinforced Thermoplastic Tape Using the Bias Extension Methodcitations
- 2022An experimental approach to reproduce in-plane fiber waviness in thermoplastic composites test coupons using a reverse forming methodcitations
- 2022Modeling of rain erosion damage and lifetime of wind turbine blades
- 2022On the Effect of Release Agent and Heating Time on Tool-Ply Friction of Thermoplastic Composite in Melt
- 2021The influence of inter-laminar thermal contact resistance on the cooling of material during laser assisted fiber placementcitations
- 2021On the temperature evolution during continuous laser-assisted tape winding of multiple C/PEEK layers: The effect of roller deformationcitations
- 2021Efficient analysis of dense fiber reinforcement using a reduced embedded formulationcitations
- 2021Is Wall Slip causing the Transient Ply-ply Friction Response of UD C/PEEK?
- 2021On the origin of start-up effects in ply-ply friction for UD fiber-reinforced thermoplastics in meltcitations
- 2021Characterizing formability of thermoplastic composite UD tape
- 2021Formation of Flat-on Lamellar Crystals in Absence of Nanoconfinementcitations
- 2021Effect of grit-blasting on the fracture toughness of hybrid titanium-thermoplastic composite jointscitations
- 2021Influence of the Polymer Interphase Structure on the Interaction between Metal and Semicrystalline Thermoplasticscitations
- 2021Simulating the induction heating of cross-ply C/PEKK laminates – sensitivity and effect of material variabilitycitations
- 2021The effect of reinforcement, fibre, and matrix on the forming behaviour of continuous fibre reinforced thermoplastic composites
- 2021Intra-ply shear characterization of unidirectional fiber reinforced thermoplastic tape using the bias extension methodcitations
- 2021Effect of in-plane fiber waviness defects on the compressive properties of quasi-isotropic thermoplastic compositescitations
- 2021Optical characterization of fiber-reinforced thermoplastic tapes for laser-based composite manufacturingcitations
- 2021A fully coupled local and global optical-thermal model for continuous adjacent laser-assisted tape winding process of type-IV pressure vesselscitations
- 2021Mesoscale Process Modeling of a Thick Pultruded Composite with Variability in Fiber Volume Fractioncitations
- 2021Tool-ply interaction in the formation of waviness during C/PEEK consolidationcitations
- 2021Material characterization of a pultrusion specific and highly reactive polyurethane resin systemcitations
- 2021Characterisation and improvement of the quality of mixing of recycled thermoplastic compositescitations
- 2021Bending behaviour of thermoplastic composites in melt: A data-driven approachcitations
- 20203D Numerical Modeling of Laser Assisted Tape Winding Process of Composite Pressure Vessels and Pipes—Effect of Winding Angle, Mandrel Curvature and Tape Widthcitations
- 2020Temperature variation during continuous laser-assisted adjacent hoop winding of type-IV pressure vessels: An experimental analysiscitations
- 2020Temperature variation during continuous laser-assisted adjacent hoop winding of type-IV pressure vesselscitations
- 2020Non-uniform crystallinity and temperature distribution during adjacent laser-assisted tape winding process of carbon/PA12 pipescitations
- 2020A new global kinematic-optical-thermal process model for laser-assisted tape winding with an application to helical-wound pressure vesselcitations
- 2020Optimization of the laser-assisted tape winding process using an inverse kinematic-optical-thermal modelcitations
- 2020New process optimization framework for laser assisted tape winding of composite pressure vesselscitations
- 2020Real-time observation of waviness formation during C/PEEK consolidationcitations
- 2020Experimental and computational analysis of the polymerization overheating in thick glass/Elium® acrylic thermoplastic resin compositescitations
- 2020Characterization of interdiffusion mechanisms during co-bonding of unsaturated polyester resin to thermoplastics with different thermodynamic affinitiescitations
- 2020Analysis of the Thermoplastic Composite Overmolding Processcitations
- 2020Ultrasonic inline inspection of a cement-based drinking water pipelinecitations
- 20191D squeeze flow analysis of chopped long fibre thermoplastic composite
- 2019Investigation of transverse residual stresses in a thick pultruded composite using digital image correlation with hole drillingcitations
- 2019Automatic fiber tracing and waviness detection in carbon fiber composite micrographs
- 2019Rapid Manufacturing of a Tailored Spar by AFP and Stamp Forming
- 2019Towards the combination of automated lay-up and stamp forming for consolidation of tailored composite componentscitations
- 2019Printing "smart" Inks of Redox-Responsive Organometallic Polymers on Microelectrode Arrays for Molecular Sensingcitations
- 2019Evaluation of insert design on the performance of repaired composite-Ti alloy jointscitations
- 2019Steering the propagation direction of a non-linear acoustic wave in a solid materialcitations
- 2019The influence of physical ageing on the in-plane shear creep compliance of 5HS C/PPScitations
- 2019Shredding and sieving thermoplastic composite scrapcitations
- 2018Meso-Scale Process Modelling Strategies for Pultrusion of Unidirectional Profiles
- 2018Analysis of residual transverse stresses in a thick UD glass/polyester pultruded profile using hole drilling with strain gage and digital image correlationcitations
- 2018Deformation mechanism in compression molding of discontinuous thermoplastic composites
- 2018A level-set-based strategy for thickness optimization of blended composite structurescitations
- 2018A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economycitations
- 2018Assessment of failure and cohesive zone length in co-consolidated hybrid C/PEKK butt jointcitations
- 2018Effects of misalignments on thermally induced shapes of woven fabric reinforced laminatescitations
- 2018A continuum mechanics analysis of shear characterisation methodscitations
- 2018Rapid Manufacturing of a Tailored Spar by AFP and Stamp Forming
- 2018Deconsolidation of C/PEEK blanks: on the role of prepreg, blank manufacturing method and conditioningcitations
- 2018History and future of composites forming analysiscitations
- 2018Non-hoop winding effect on bonding temperature of laser assisted tape winding processcitations
- 2018A Methodology Based on Pulse-Velocity Measurements to Quantify the Chemical Degradation Levels in Thin Mortar Specimenscitations
- 2018Deformability of a woven fabric modified with in-situ grown nanofibrescitations
- 2018An experimental investigation on the thermal field of overlapping layers in laser-assisted tape winding processcitations
- 2018New analytical and numerical optical model for the laser assisted tape winding processcitations
- 2018Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFPcitations
- 2018Experimental Validation of Non-Collinear Wave Mixing Model in a PVC Specimencitations
- 2017A Review on the Mechanical Modeling of Composite Manufacturing Processescitations
- 2017Fibre length distribution of shredded thermoplastic composite scrap
- 2017Quantification of tape deconsolidation during laser assisted fiber placement
- 2017The effect of titanium surface treatment on the interfacial strength of titanium – Thermoplastic composite jointscitations
- 2017Thermal modeling strategies for laser assisted tape winding process
- 2017Challenges in Stamp Forming Tailored Blanks
- 2017Experimental and numerical analysis of laser reflection for optical-thermal process modeling of tape winding
- 2017In-line physics-based model simulation for process modeling of laser tape winding
- 2017Thermal modeling strategies for laser assisted tape winding (LATW) process
- 2017Viscoelastic bending model for continuous fiber-reinforced thermoplastic composites in meltcitations
- 2017Transverse crack initiation under combined thermal and mechanical loading of Fibre Metal Laminates and Glass Fibre Reinforced Polymers
- 2017Influence of prepreg characteristics on stamp consolidationcitations
- 2017Numerical modeling of laser assisted tape winding processcitations
- 2016Process induced transverse shear stresses in thick unidirectional pultruded profiles
- 2016A yarn interaction model for circular braidingcitations
- 2016Impact damage identification in composite skin-stiffener structures based on modal curvaturescitations
- 2016Parameter Study for Friction Surface Cladding of AA1050 on AA2024-T351
- 2016Vibro-acoustic modulation–based damage identification in a composite skin–stiffener structurecitations
- 2016Intimate contact development in laser assisted fiber placementcitations
- 2016Ultrasonic measurements of undamaged concrete layer thickness in a deteriorated concrete structurecitations
- 2016Development of an inline water mains inspection tech nologycitations
- 2016Development of multifunctional complex fluids for coating of semi-porous surfaces
- 2016Development of an inline water mains inspection technologycitations
- 2016Optical process model for laser-assisted tape winding
- 2016Carbon Nanofibers Grown on Large Woven Cloths: Morphology and Properties of Growthcitations
- 2016Manufacturing processes for braided composite materialscitations
- 2016Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK compositescitations
- 2015Editorial
- 2015Investigation of the Residual Stress State in an Epoxy Based Specimen
- 2015Pultrusion of a vertical axis wind turbine blade part-I: 3D thermo-chemical process simulationcitations
- 2015Pultrusion of a vertical axis wind turbine blade part-II: combining the manufacturing process simulation with a subsequent loading scenariocitations
- 2015Thermal and Flow Analysis of Friction Surface Cladding with Varying Clad Layer Thickness
- 2015Effect of ply orientation on bond strength in fiber-placed composites
- 2015Investigation of process induced warpage for pultrusion of a rectangular hollow profilecitations
- 2015A parametric study on compression molding of reference parts with integrated features using carbon composite production waste
- 2015Synthesis of Carbon Nanofibers on Large Woven Clothcitations
- 2015Effect of overlap length on the mechanical properties of flake reinforced thermoplastic composites
- 2015Matrix damage helaing in fiber reinforced composite materials containing embedded active and passive wires
- 2015Thermoplastic composites manufacturing by thermoformingcitations
- 2015Nonlinear dynamic behavior of an impact damaged composite skin-stiffener structurecitations
- 2015Friction surface cladding: An exploratory study of a new solid state cladding processcitations
- 2015Consolidation Quality of Press-Formed Tailored Blanks
- 2015On the mechanical behaviour of a butt jointed thermoplastic composite under bending
- 2015Locking and enrichment strategies
- 2015Friction Surface Cladding of AA1050 on AA2024-T351; influence of clad layer thickness and tool rotation rate
- 2015Computational analysis of the interaction between impregnation, forming and curing in pultrusioncitations
- 2014Vibro-Acoustic Modulation Based Damage Identification in a Composite Skin-Stiffener Structure
- 2014Modelling the pultrusion process of an industrial L-shaped composite profilecitations
- 2014Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approachescitations
- 2014Numerical process simulations for industrially pultruded profiles
- 2014Dry friction characterisation of carbon fibre tow and satin weave fabric for composite applicationscitations
- 2014Circular braiding process simulation for a pressure vesselcitations
- 2014Forming limits of thermoplastic compositescitations
- 2014The effect of mandrel configuration on the warpage in pultrusion of rectangular hollow profilescitations
- 2014Bending characterization of UD compositescitations
- 2014The effect of product size on the pulling force in pultrusioncitations
- 2014Formability analyses of uni-directional and textile reinforced thermoplasticscitations
- 2014Investigation of process induced residual stresses and deformations for industrially pultruded parts having UD and CFM layers
- 2014Shear characterisation of uni-directional fibre reinforced thermoplastic melts by means of torsioncitations
- 2014Characterization of thermoplastic composites for hot stamp forming
- 2014Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark resultscitations
- 2014Frictional behavior of carbon fiber tows: A contact mechanics model of tow–tow frictioncitations
- 2014Simulation of the circular braiding process with Braidsim
- 2014Material characterization of a polyester resin system for the pultrusion processcitations
- 2014Circular braiding take-up speed generation using inverse kinematicscitations
- 2014Investigation of the spring-in of a pultruded l-shaped profile for various processing conditions and thicknessescitations
- 2014Thermo-mechanical process modelling of industrially pultruded parts having UD and CFM layers
- 2013Development of a Damage Quantification Model for Composite Skin-Stiffener Structures
- 2013Braiding take-up speed optimization - Case studies
- 2013Simple tests as critical indicator of intra-ply shear lockingcitations
- 2013Nonlinear dynamic behavior of impact damage in a composite skin-stiffener structure
- 2013Reliable inkjet-printed interconnections on foil-type Li-Ion Batteriescitations
- 2013Frictional behaviour of high performance fibrous tows: A contact mechanics model of tow-metal frictioncitations
- 2013Experimental characterisation of recycled (glass/TPU woven fabric) flake reinforced thermoplastic composites
- 2013Pull-off strength assessment of co-consolidated AS4/PEEK T-joints
- 2013Critical assessment of the mandrel peel test for fiber reinforced thermoplastic laminatescitations
- 2013Geometrical optimization of a hingeless deployment system for an active rotor bladecitations
- 2013Intra-Ply Shear Locking in Finite Element Simulations
- 2013Influence of moisture content on impact properties of flax fibre reinforced polymers
- 2013Cladding of advanced Al alloys employing friction stir weldingcitations
- 2013Optimisation of the circular braiding process
- 2013Delamination in carbon-fibre composites improved with in situ grown nanofibrescitations
- 2013On crystallisation and fracture toughness of poly(phenylene sulphide) under tape placement conditionscitations
- 2013Strain direction dependency of martensitic transformation in austenitic stainless steels: The effect of γ-texturecitations
- 2013Frictional behaviour of high performance fibrous tows: Friction experimentscitations
- 2013Delamination in carbon-fibre composites improved with in situcitations
- 2013Optimization of the tape placement process parameters for carbon-PPS compositescitations
- 2013Formability of fiber-reinforced thermoplastics in hot press forming process based on friction propertiescitations
- 2013Characterisation of recycled (glass/TPU woven fabric) flake reinforced thermoplastic composite
- 2013FibreChain: characterization and modeling of thermoplastic composites processing
- 2013Engineers in a flap over rotor blades
- 2012Investigation of PVC physical ageing in field test specimens using ultrasonic and dielectric measurementscitations
- 2012Tow Mechanics: a contact mechanics approach of friction in fibrous tows during formingcitations
- 2012Shear Characterisation of UD Thermoplastic Composites
- 2012Low-cost technology for the integration of micro- and nanochips into fluidic systems on printed circuit board: fabrication challenges
- 2012Forming simulation sensitivity study of the double-dome benchmark geometrycitations
- 2012Non-collinear wave mixing for non-linear ultrasonic detection of physical ageing in PVCcitations
- 2012Simulation of flexible mechanisms in a rotating blade for smart-blade applications
- 2012Vibration based damage identification in a composite T-beam utilising low cost integrated actuators and sensors
- 2012Forming of Thermoplastic Compositescitations
- 2012Smart actuation for helicopter rotorbladescitations
- 2012On the weld strength of in situ tape placed reinforcements on weave reinforced structurescitations
- 2012Towards Design for Thermoplastic Composites Manufacturing Using Process Simulation
- 2012Performance of inkjet-printed structures on different substrate materials under high humidity and elevated temperature conditionscitations
- 2012GENERATION OF MICRO-SIZED CONDUCTIVE LINES ON GLASS FIBRE FABRICS BY INKJET PRINTINGcitations
- 2012Failure Modeling of Thermoplastic Butt-Joint Stiffened Panels by Quasi-Static Loading
- 2012Free Surface Modeling of Contacting Solid Metal Flows Employing the ALE formulationcitations
- 2012A Friction-Test Benchmark with Twintex PPcitations
- 2011Development of a Damage Quantification Model for Composite Skin-Stiffener Structures
- 2011Dynamic characterisation of a damaged composite structure with stiffeners employing fibre bragg gratings
- 2011Structural Health Monitoring of an Advanced Composite Aircraft Structure Using a Modal Approach
- 2011Geometric optimisation of a gurney flap hinge-less deployment system for a helicopter model blade
- 2011Friction in Forming of UD Compositescitations
- 2011Process simulations for composites forming of UD tape laminates
- 2011Implementation of Inkjet Printing in Emerging Textile based Smart Applications
- 2011Fabrication and mechanical characterisation of inkjet printed strain gauges
- 2011Vibration based structural health monitoring and the modal strain energy damage index algorithm applied to a composite T-beamcitations
- 2011Geometric optimisation of hinge-less deployment system for an active rotorblade
- 2011In-Plane Shear Characterisation of Uni-Directionally Reinforced Thermoplastic Meltscitations
- 2011Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir weldingcitations
- 2011Friction Testing of Thermoplastic Composites
- 2011Towards a process simulation tool for the laseer assisted tape placement process
- 2011A spool pattern tool for Circular Braiding
- 2011Complex stamp forming of advanced thermoplastic composites
- 2011A lubrication approach to friction in thermoplastic composites forming processescitations
- 2010Friction in textile thermoplastic composites forming
- 2010Vibration based structural health monitoring of a composite plate with stiffeners
- 2010Modeling of Stress Development During Thermal Damage Healing in Fiber-reinforced Composite Materials Containing Embedded Shape Memory Alloy Wirescitations
- 2010Consolidation process model for film stacking glass/PPS laminatescitations
- 2010Tow Mechanics: Improving The Accuracy Of Deformation Modelling
- 2010Finite element simulations of laminated composites forming processescitations
- 2010Weld strength assessment for tape placementcitations
- 2010Experimental characterization of fibre-reinforced composites improved with nanofibres or nanotubescitations
- 2010Friction measurements on carbon fibre towscitations
- 2010Towards modelling of the frictional behaviour of deforming fibrous tows: A geometrical approach
- 2010Forming predictions of UD reinforced thermoplastic laminates
- 2010Development of a multigrid finite difference solver for benchmark permeability analysis
- 2010Automated Double Cantilever Beam test system – A two-axis moving camera setup controlled by image analysis for crack recognition
- 2010Constitutive modelling of UD reinforced thermoplastic laminates
- 2010Towards a process simulation tool for the laseer assisted tape placement process
- 2010Deformability of a Textile Reinforcement Modified with Nanofibres
- 2010Actuators for smart applications
- 2010Vibration based structural health monitoring of a composite plate structure with multiple stiffeners
- 2010Vibration based Structural Health Monitoring of a composite T-beamcitations
- 2009Fabrication of RF Circuit Structures on a PCB Material Using Inkjet Printing-Electroless Plating and the Substrate Preparation for the Samecitations
- 2009Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites
- 2009Assessment of joining methods for thermoplastic composites
- 2009Inkjet printing and adhesion characterisation of conductive tracks on a commercial printed circuit board materialcitations
- 2009Design of an experimental setup to measure tool-ply and ply-ply friction in thermoplastic laminatescitations
- 2009Piezo-Actuators for Synthetic-Jets
- 2009Surface Modification of a PCB Substrate for Better Adhesion of Inkjet Printed Circuit Structures
- 2009Models for Textile Composites Forming
- 2009Vibration based structural health monitoring in fibre reinforced composites employing the modal strain energy method
- 2009A comparative study of two conductive inkjet inks for fabrication of RF circuit structures
- 2009Inkjet-printing- and electroless-plating-based fabrication of RF circuit structures on high-frequency substratescitations
- 2009A Comparative study of two conductive ink jet inks for fabrication of RF Circuit structures
- 2009Piezo-Actuators for Gurney flap concept
- 2009An attempt to use scratch tests to predict the residual lifetime of unplasticised poly(vinyl chloride) pipescitations
- 2009Actuator review for smart rotor blades
- 2009A multi-layer triangular membrane finite element for the forming simulation of laminated compositescitations
- 2009Multi-scale effects in the consolidation of thermoplastic laminatescitations
- 2009A consolidation process model for film-stacking glass/PPS laminates
- 2009A consolidation process model for filmstacking glass/PPS laminates
- 2009Analysis of yarn bending behaviour
- 2008Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark resultscitations
- 2008Solutions to intra-ply shear locking in finite element analyses of fibre reinforced materialscitations
- 2008Inkjet printing of functional inks on PCB materials
- 2008An idealised BC for the meso scale analysis of textile impregnation (CD-rom).
- 2008Non-Crimp Fabric Permeability Modelling (CD-rom)
- 2008Ductile or brittle? The impact behaviour of uPVC upon ageing
- 2008Analytical modeling of impact resistance and damage tolerance of laminated composite platescitations
- 2008Transverse permeability of woven fabricscitations
- 2008Delamination detection with fibre Bragg gratings based on dynamic behaviourcitations
- 2008Tool-ply friction in thermoplastic composite formingcitations
- 2008Tool-ply friction in thermoplastic composite forming (CD-rom)citations
- 2008Damage healing in thermoplastic composite plates by employing shape memory alloy wires (on USB stick)
- 2008Permeability Prediction Using a Multigrid Method (CD-rom)
- 2008Dynamic analysis of degradation in E-glass reinforced epoxy composite
- 2008Transverse permeability of woven fabrics (CD-rom)
- 2007Adhesion characterization of inkjet printing
- 2007Constitutive modelling for composite formingcitations
- 2007Characterising and Modelling Tool-ply Friction of Viscous Textile Composites (CD-rom)
- 2007Compression after impact on curved composite panels
- 2007Tool-ply friction in composite forming
- 2007High velocity impact on textile reinforced composites
- 2007Large deformation simulation of anisotropic material using an updated Lagrangian finite element methodcitations
- 2007Composites formingcitations
- 2007Adhesion characterization of inkjet printed tracks
- 2007Braiding simulation and slip evaluation for arbitrary mandrels
- 2007Optimising the flow pipe arrangement for resin infusion under flexible toolingcitations
- 2007Characterising and modelling tool-ply friction of viscous textile composites
- 2007Adhesion Characterisation of Inkjet Printed Silver Tracks
- 2007High velocity impact on textile reinformced composties (CD-rom)
- 2007Fully 21/2D flow modeling of resin infusion under flexible tooling using unstructured meshes and wet and dry compaction propertiescitations
- 2007Intra-ply shear locking
- 2007Optimising the consolidation of thermoplastic composite laminates
- 2006Laminate mechanics for balanced woven fabricscitations
- 2006Experimental investigation of the compressibility and permeability of fabric reinforcements
- 2006An integral model for high precision composite forming
- 2006Damage development around moulded-in holes in flat braided composites (CD-ROM)
- 2006A permeability prediction for non-crimp fabrics
- 2006Carbon composite based on Multiaxial Multiply Stiched Preforms. Part V: Geometry of Sheared Biaxial Fabricscitations
- 2006Residual stresses in rubber formed thermoplastic composites
- 2006Fibre reinforced photovoltaic modules
- 2006Modelling of the viscoelastic behaviour of steel reinforced thermoplastic pipescitations
- 2006Experimental investigation of the compressibility and permeability of fabric reinforcements : abstract
- 2006Experimental verification of out-of-plane permeability
- 2006An integral process model for high precision composite forming
- 2006Experimental verification of out-of-plane permeability : powerpoint presentation
- 2006Braiding simulation for RTM preforms (CD-ROM)
- 2006Large deformation simulation of anisotropic material
- 2006Investigation of tool-py friction of viscous textile composites (CD-rom)
- 2006Effects of out-of-plane properties on distortions of composite panels
- 2006Spring-forward in composite plate elements
- 2006Carbon composites based on multiaxial multiply stitched preforms. Part V: geometry of sheared biaxial fabricscitations
- 2006Modelling of fabric draping: Finite elements versus a geometrical method
- 2006Fibre orientation modelling for rubber press forming of thermoplastic laminates
- 2005Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and compression tests of the preformscitations
- 2005Deliverable D5.3-01: Description of predicitons of the draping and filling models (2nd phase)
- 2005Design, production and materials of PV powered consumer products - the case of mass production (cd-rom)
- 2005Deliverable D5.1-01: Description of predictions of the draping and filling models
- 2005Carbon Composites based on multiaxial multiply stitched performs, Part 3: Biaxial Tension, picture frame and compression tests of the preformscitations
- 2005Self healing structural components
- 2005Finite element simulation of draping with non-crimp fabrics
- 2005A permeability prediction for non-crimp fabrics
- 2005Analysis of the mechanical properties of a reinforced thermoplastic pipe (RTP)citations
- 2005Comparison of Permeability Experiments and Explanations of Experimental Scatter based on Geometric Models
- 2005Drape simulation of non-crimp fabrics
- 2005Spring-forward in composite plate elements
- 2005Permeabiliteit NIVR 2004
- 2005Forming simulation of febre reinforced composites
- 2005Drape Modelling and Experimental Validation
- 2004Dielectric Properties in Composites
- 2004Permeability prediction of non-crimp fabrics based on a geometric model
- 2004A permeability prediction for (Un)Sheared non-crimp fabrics
- 2004Permeability Experiments: Design, development and methodology of a resin transfer moulding measuring device [Abstract]
- 2004Research supports Thermoplastics
- 2004Maatnauwkeurig Rubber Persen eindrapportage onderzoek Universiteit Twente
- 2004Multigrid/Network approach based permeability prediction
- 2004Description of predictions of the draping and filling models
- 2004Modelling shape distortions in composite products
- 2004Grundliche Prozess-Analyse
- 2004Trennwand simulations for BMW
- 2004A Cooperatieve Benchmark Effort on Testing of Woven Composites
- 2003Thermal characterization of PPS
- 2003Permeability Prediction of Non-Crimp Fabrics Based on a Geometric Model
- 2003Quarterly Progress Report UT-NLR RTM project
- 2003Residual stresses in rubber formed thermoplastic composites
- 2003Material characterisation for finite element simulations of draping with non-crimp fabrics
- 2003Appendix II: Permeability, drapeability and compressibility - Three Interrelated Properties
- 2003Architecture and permeability of sheared charbon firbre-crimp fabrics
- 2003Drape modelling of multi-layered composites
- 2003Geometry and permeability of non-crimp fabrics
- 2003The effect of residual stress on transverse cracking in cross-ply carbon-polyetherimide laminates under bending
- 2003Permeability prediction of a single layer non-crimp fabric
- 2003Fibre orientation modelling for rubber press forming of thermoplastic composites
- 2003The effect of residual stress on transverse cracking in crossply carbon-polyetherimide laminates under bendingcitations
- 2003Residual stresses in non-symmetrical carbon-epoxy laminates
- 2002On the properties of quasi-isotropic laminatescitations
- 2002A least squares approximation of annular flow
- 2002Braiding of RTM preforms
- 2002High precision moulding of thermosetting composites
- 2002Through-thickness permeability measurements of fibre reinforcements
- 2002Modelling of a reinforced thermoplastic pipe
- 2002Thermal characterisation of thermoplastic composites
- 2002Definition o developed RVE (unit cell) models
- 2002Drape modelling of multilayer fabric reinforced thermoplastic laminates
- 2002Multi layer drape modelling
- 2002Impact damage in woven fabric reinforced composites
- 2002Simulations of the braiding process for RTM preforms
- 2002Revieuw of processing models
- 2002Prediction of the yam trajectories on complex braided preformscitations
- 2002Spring forward of woven fabric reinforced composites
- 2002Fibre orientation modelling for rubber press forming of thermoplastic laminates
- 2002Warpage of rubber pressed composites
- 2002Materiaaleigenschappen van vezelversterkte kunststoffen
- 2002Springback analysis of doubly curved GLARE panels
- 2001The effect of fibre distribution on composite distortions
- 2001Resin transfer moulding of high performance composites
- 2001Finite element modelling of fabric draping
- 2001Double dome experiment
- 2001Warping of rubber pressed composite panels
- 2001Processing effects on composite distortions
- 2001Residual Stresses, Final Report Work Package 7
- 2001Modelling of fabric draping: Finite elements versus a geometrical method
- 2001Environmental effects on residual stresses
- 2000Modelling the distortions of skewed woven fabric reinforced composites
- 2000Fracture of polyetherimide (PEI) and a PEI based compositecitations
- 2000Comparison of fracture toughness (G<inf>IC</inf>) values of polyetherimide (PEI) and a carbon-fibre/PEI composite: an experimental and theoretical studycitations
- 2000Modelling of residual stresses in rubber pressed composite products
- 2000Effects out-of-plane properties on distortions of composite panels
- 2000Modelling the thermo-elastic properties of skewed woven fabric reinforced composites
Places of action