361.912 PEOPLE
| People | Locations | Statistics |
|---|---|---|
| Chatterjee, Abhijit |
| |
| Abdullin, S. |
| |
| Chatterjee, R. M. |
| |
| Tadel, M. |
| |
| Anguiano, J. |
| |
| Polatoz, A. |
| |
| Kiminsu, U. |
| |
| Jofrehei, A. |
| |
| Ambrozas, M. |
| |
| Kwok, K. H. M. |
| |
| Nogima, H. |
| |
| Kaestli, H. C. |
| |
| Bury, F. |
| |
| Wayne, M. |
| |
| Adiguzel, A. |
| |
| Musienko, Y. |
| |
| Hadley, N. J. |
| |
| Mal, Prolay |
| |
| Reichert, Joseph |
| |
| Cooper, S. I. |
| |
| Alves, G. A. |
| |
| Lincoln, D. |
| |
| Hirschauer, J. |
| |
| Koseyan, O. K. |
| |
| Droll, A. |
|
Kainer, Karl Ulrich
Newcastle University
in Cooperation with on an Cooperation-Score of 37%
Topics
- Magnesium
- corrosion
- magnesium alloy
- creep
- nanocomposite
- recrystallization
- microstructure
- intermetallic
- extrusion
- wire
- texture
- dislocation
- grain
- phase
- composite
- casting
- pore
- dispersion
- nanoparticle
- deformation mechanism
- grain growth
- strength
- fatigue
- polymer
- heat resistance
- titanium
- aluminium
- additive manufacturing
- aging
- hardness
- yield strength
- precipitate
- tomography
- synchrotron
- simulation
- wear resistance
- porous
- sintering
- injection molding
- aluminide
- defect
- electron backscatter diffraction
- solidification
- scanning electron microscopy
- phase diagram
- experiment
- transmission electron microscopy
- phase evolution
- forging
- fatigue testing
- ceramic
- reactive
- surface
- porosity
- forming
- melting temperature
- morphology
- electrodeposition
- biomaterials
- copper
- microscopy
- amorphous
- susceptibility
- melt
- precipitation
- tin
- tin alloy
- copper alloy
- aluminum-copper alloy
- silver
- ultrasonic
- viscosity
- acoustic emission
- differential scanning calorimetry
- calorimetry
- stainless steel
- homogenization
- thin film
- interfacial
- spin coating
- galvanic corrosion
- die casting
- alloy composition
- stress corrosion
- impedance spectroscopy
- fractography
- zinc
- drawing
- hot rolling
- grain size
- thermal expansion
- crack
- metal-matrix composite
- anisotropic
- phase transition
- show 65 more
Publications (379/379 displayed)
- 2020Thixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistancecitations
- 2020Effects of heat treatment on the microstructural evolution and creep resistance of Elektron21 alloy and its nanocompositecitations
- 2020Individual/synergistic effects of Al and AlN on the microstructural evolution and creep resistance of Elektron21 alloycitations
- 2020Effect of Ca and Nd on the microstructural development during dynamic and static recrystallization of indirectly extruded Mg–Zn based alloyscitations
- 2020Effects of Intermetallic Microstructure on Degradation of Mg-5Nd Alloycitations
- 2020Effect of Nd Additions on the Mechanical Properties of Mg Binary Alloyscitations
- 2020Variation of Extrusion Process Parameter for the Magnesium Alloy ME21citations
- 2020Cold Formability of Extruded Magnesium Bandscitations
- 2020Effect of Heat Treatment on the Corrosion Behavior of Mg-10Gd Alloy in 0.5% NaCl Solutioncitations
- 2020On the direct extrusion of magnesium wires from mg-al-zn series alloyscitations
- 2019Influence of Nd or Ca addition on the dislocation activity and texture changes of Mg–Zn alloy sheets under uniaxial tensile loadingcitations
- 2019Grain refinements of magnesium alloys inoculated by additions of external SiC particlescitations
- 2019The Role of Second Phases on the Creep Behavior of As-Cast and Hot-Extruded Mg-Ca-Zr Alloys
- 2019Development of Pore-Free Ti-Si-C MAX/Al-Si Composite Materials Manufactured by Squeeze Casting Infiltrationcitations
- 2019Influences of Al and high shearing dispersion technique on the microstructure and creep resistance of Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloycitations
- 2019Enhanced predictive corrosion modeling with implicit corrosion productscitations
- 2019Enhancing the creep resistance of AlN/Al nanoparticles reinforced Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloy by a high shear dispersion techniquecitations
- 2019Influences of SiC Particle Additions on the Grain Refinement of Mg–Zn Alloyscitations
- 2019Influences of AlN/Al Nanoparticles on the Creep Properties of Elektron21 Prepared by High Shear Dispersion Technologycitations
- 2019Role of deformation mechanisms and grain growth in microstructure evolution during recrystallization of Mg-Nd based alloyscitations
- 2019Special Section "Light Materials - Science and Technology"
- 2019Unexpected Expansion Behavior of Mg-Al Alloys During Isothermal Ageingcitations
- 2019Special Section “Light Materials − Science and Technology”
- 2019Influence of Microstructure Evolution During Twin-Roll Casting on the Properties of Magnesium Sheetscitations
- 2019Processing Effects on the Formability of Extruded Flat Products of Magnesium Alloyscitations
- 2019Corrigendum to “Influence of Nd or Ca addition on the dislocation activity and texture changes of Mg–Zn alloy sheets under uniaxial tensile loading” [Mater. Sci. Eng.: A 761 (22 July 2019) 138053](S0921509319308391)(10.1016/j.msea.2019.138053)
- 2018Effects of Gd solutes on hardness and yield strength of Mg alloyscitations
- 2018Influences of yttrium content on microstructure and mechanical properties of as-cast Mg–Ca–Y–Zr alloyscitations
- 2018Microstructure and mechanical properties of mg-gd alloys as biodegradable implant materialscitations
- 2018Corrosion behaviour of as-cast ZK40 with CaO and Y additionscitations
- 2018The Effect of Solid Solute and Precipitate Phase on Young's Modulus of Binary Mg–RE Alloyscitations
- 20183D reconstruction of plasma electrolytic oxidation coatings on Mg alloy via synchrotron radiation tomographycitations
- 2018Simulation assisted investigation of substrate geometry impact on PEO coating formationcitations
- 2018Influence of particle additions on corrosion and wear resistance of plasma electrolytic oxidation coatings on Mg alloycitations
- 2018On the influence of solution and ageing treatments on the microstructure of ZK40 alloys modified with Ca, Gd, Nd and y additions,Zum Einfluss des Lösungsglühens und Aushärtens auf die Mikrostruktur von ZK40-Legierungen, modifiziert durch Zugaben von Ca, Gd, Nd und Y
- 2018Processing effects on the formability of magnesium alloy sheetscitations
- 2018Influence of SiO<inf>2</inf> particles on the corrosion and wear resistance of plasma electrolytic oxidation-coated AM50 Mg alloycitations
- 2018Magnesium pistons in engines: Fiction or fact?citations
- 2018Deformation and recrystallization mechanisms and their influence on the microstructure development of rare earth containing magnesium sheetscitations
- 2018Current Status and Recent Developments in Porous Magnesium Fabricationcitations
- 2018Waste Mg-Al based alloys for hydrogen storagecitations
- 2018Profile shape effect on the texture and mechanical properties of extruded rare earth containing magnesium alloyscitations
- 2018Towards active corrosion protection of Mg alloys using corrosion inhibition approaches
- 2018Mg alloys: Challenges and achievements in controlling performance, and future application perspectivescitations
- 2018Enhanced predictive corrosion modeling via randomly distributed boundary conditionscitations
- 2018Magnesium and Magnesium Alloyscitations
- 2017Effects of gadolinium and neodymium addition on young’s modulus of magnesium-based binary alloyscitations
- 2017Corrosion and creep resistance of Thixomolded® magnesium alloyscitations
- 2017As cast microstructures on the mechanical and corrosion behaviour of ZK40 modified with Gd and Nd additionscitations
- 2017Effects of Mn and Zn solutes on grain refinement of commercial pure magnesiumcitations
- 2017Influence of plasma electrolytic oxidation coatings on fatigue performance of AZ31 Mg alloycitations
- 2017A model describing the growth of a PEO coating on AM50 Mg alloy under constant voltage modecitations
- 2017In situ tensile texture analysis of a new Mg-RE alloy
- 20173D microstructural evolution on solidifying Mg–5Nd–5Zn alloy observed via in situ synchrotron tomographycitations
- 2017Influence of Dy in solid solution on the degradation behavior of binary Mg-Dy alloys in cell culture mediumcitations
- 2017Sintering Behavior and Microstructure Formation of Titanium Aluminide Alloys Processed by Metal Injection Moldingcitations
- 2017Recent research and developments on wrought magnesium alloyscitations
- 2017Predictive modeling of long-time crevice evolution at e-coat defects under climate chamber test conditionscitations
- 2017Effect of the Zn content on the compression behaviour of Mg5Nd(Zn): An in situ synchrotron radiation diffraction studycitations
- 2017The Use of Neutron and Synchrotron Research for Aerospace and Automotive Materials and Components
- 2016In situ synchrotron radiation diffraction investigation of the compression behaviour at 350°C of ZK40 alloys with addition of CaO and Ycitations
- 2016As solidified Microstructure nvestigation of Mg15Y and MgxYyGd (x+y=15 wt.%) Ternary Alloys
- 2016Forging of cast Mg-3Sn-2Ca-0.4Al-0.4Si magnesium alloy using processing mapcitations
- 2016Axial fatigue testing of Ti–6Al–4V using an alternative specimen geometry fabricated by metal injection mouldingcitations
- 2016Creep behavior of Mg-10Gd-xZn (x=2 and 6wt%) alloyscitations
- 2016In situ synchrotron radiation diffraction investigation of the compression behaviour at 350 °C of ZK40 alloys with addition of CaO and Ycitations
- 2016Solid solution strengthening in Mg-Gd alloyscitations
- 2016In vitro corrosion and cytocompatibility properties of Mg-2Gd-X(Ag, Ca) alloyscitations
- 2016Hot tearing characteristics of Mg–2Ca–xZn alloyscitations
- 2016As solidified microstructure investigation of Mg15Y and MgxYyGd (x+y=15 wt.%) ternary alloyscitations
- 2016Role of SiC in grain refinement of aluminum-free Mg-Zn alloyscitations
- 2016Influence of electrical parameters on particle uptake during plasma electrolytic oxidation processing of AM50 Mg alloycitations
- 2016Plasma electrolytic oxidation coatings with particle additions - A reviewcitations
- 2016Thermodynamic Description of Reactions between Mg and CaOcitations
- 2016Investigation of the formation mechanisms of plasma electrolytic oxidation coatings on Mg alloy AM50 using particlescitations
- 2016Protecting molten magnesium and its alloys
- 2016Unexpected formation of hydrides in heavy rare earth containing magnesium alloyscitations
- 2016Influence of surface pre-treatment on the deposition and corrosion properties of hydrophobic coatings on a magnesium alloycitations
- 2016The Role of Zn on the Elevated Temperature Compression Behavior of Mg5Nd: An In Situ Synchrotron Radiation Diffraction Studycitations
- 2016Investigation of electrode distance impact on PEO coating formation assisted by simulationcitations
- 2016Formation of photocatalytic plasma electrolytic oxidation coatings on magnesium alloy by incorporation of TiO<inf>2</inf> particlescitations
- 2016Challenges for implementation of magnesium into more applicationscitations
- 2016Microstructure and mechanical properties of Ca containing AZX310 alloy sheets produced via twin roll casting technology
- 2016Plasma electrolytic oxidation coatings on Mg alloy with addition of SiO<inf>2</inf> particlescitations
- 2015In situ synchrotron radiation diffraction study of the role of Gd, Nd on the elevated temperature compression behavior of ZK40citations
- 2015Degradation behavior of PEO coating on AM50 magnesium alloy produced from electrolytes with clay particle additioncitations
- 2015In Situ Investigation of Microstructure Evolution during Solidification of Mg10CaxGd (x=5, 10, 20) Alloyscitations
- 2015Effect of Zn addition on hot tearing behaviour of Mg-0.5Ca-xZn alloyscitations
- 2015Investigation of compression behavior of Mg-4Zn-2(Nd, Gd)-0.5Zr at 350°C by in situ synchrotron radiation diffraction
- 2015Hot Tearing Susceptibility of Mg-Ca Binary Alloyscitations
- 2015Insights into plasma electrolytic oxidation treatment with particle additioncitations
- 2015CaO dissolution during melting and solidification of a Mg-10wt.% CaO alloy detected with in situ synchrotron radiation diffractioncitations
- 2015Twin-roll casting after intensive melt shearing and subsequent rolling of an am30 magnesium alloy with addition of cao and siccitations
- 2015Deformation-induced dynamic precipitation during creep in magnesium-tin alloyscitations
- 2015In situ investigation of microstructure evolution during solidification of Mg10CaxGd (x = 5, 10, 20) alloyscitations
- 2015Sintering behaviour of Ti-45Al-5Nb-0.2B-0.2C alloy modifications by additions of elemental titanium and aluminiumcitations
- 2015CaO dissolution during melting and solidification of a Mg-10 wt.% CaO alloy detected with in situ synchrotron radiation diffractioncitations
- 2015Magnesium melt protectioncitations
- 2015In situ synchrotron radiation diffraction during solidification of Mgl5Gd: Effect of cooling rate
- 2015Challenges and solutions in the development of magnesium sheet for sustainable vehicle conceptscitations
- 2015High Strength Magnesium Alloys Through Precipitation Hardening and Micro Alloying: Considerations for Alloy Designcitations
- 2015Influence of Alloying Elements and Extrusion Process Parameter on the Recrystallization Process of Mg-Zn alloyscitations
- 2015Comparative Study of Microstructure and Texture of Cast and Homogenized TX32 Magnesium Alloy After Hot Deformationcitations
- 2015Experimental and numerical crushing analyses of thin-walled magnesium profilescitations
- 2014Role of multi-microalloying by rare earth elements in ductilization of magnesium alloyscitations
- 2014Investigation of hot workability behavior of as-cast Mg–5Sn–2Ca (TX52) magnesium alloy through processing mapcitations
- 2014Spike-forging of AS-cast TX32 magnesium alloy
- 2014In situ synchrotron radiation diffraction during solidification of Mg4Y and Mg4YxGd alloys (x - 1, 4 wt.%)
- 2014Investigations on microstructures, mechanical and corrosion properties of Mg-Gd-Zn alloyscitations
- 2014Hot tearing mechanisms of B206 aluminum-copper alloycitations
- 2014Hot forging of cast magnesium alloy TX31 using semi-closed die and its finite element simulationcitations
- 2014Magnesium alloy containing silver for degradable biomedical implants
- 2014Microstructure and compression creep strength of the newly developed magnesium alloy DieMag422
- 2014A Study on the Hot Deformation Behavior of Cast Mg-4Sn-2Ca (TX42) Alloycitations
- 2014Study of hot forging behavior of as-cast Mg-3Al-1Zn-2Ca alloy towards optimization of its hot workabilitycitations
- 2014Understanding effects of microstructural inhomogeneity on creep response - New approaches to improve the creep resistance in magnesium alloyscitations
- 2014Corrosion behavior of Mg-Gd-Zn based alloys in aqueous NaCl solutioncitations
- 2014Effect of aluminum on microstructural evolution during hot deformation of TX32 magnesium alloycitations
- 2014In situ synchrotron radiation diffraction during melting and solidification of Mg-Al alloys containing CaOcitations
- 2014Elevated Temperature and Varied Load Response of AS41 at Bolted Joint
- 2014Microstructures and mechanical properties of pure Mg processed by rotary swagingcitations
- 2014Magnesium powder injection moulding for biomedical applicationcitations
- 2014Mechanical properties and microstructures of nano SiC reinforced ZE10 composites prepared with ultrasonic vibrationcitations
- 2014Microstructural and Mechanical Aspects of Reinforcement Welds for Lightweight Components Produced by Friction Hydro Pillar Processing
- 2014Precipitation processes in Mg-Y-Nd-Ag alloys suitable for biodegradable implants
- 2014Effect of silicon content on hot working, processing maps, and microstructural evolution of cast TX32-0.4Al Magnesium alloycitations
- 2014Measurement and calculation of the viscosity of metals-a review of the current status and developing trendscitations
- 2014Creep resistance of intermetallic TNB-V5 alloy processed by metal injection moulding
- 2014Advances in Manufacturing Processes for Magnesium Alloys
- 2014Effect of aluminium and calcium on the microstructure, texture, plastic deformation and related acoustic emission of extruded magnesium-manganese alloyscitations
- 2014Addition of rare earth elements to MIM-processed TiAl6V4
- 2014In vitro mechanical and corrosion properties of biodegradable Mg-Ag alloyscitations
- 2014Formability of Magnesium Sheet ZE10 AND AZ31 with Respect to Initial Texture
- 2013Fundamentals of magnesium alloy metallurgycitations
- 2013In situ synchrotron diffraction of the solidification of Mg-RE alloyscitations
- 2013Thermodynamic assessment and experimental study of Mg-Gd alloyscitations
- 2013Compressive strength and hot deformation mechanisms in as-cast Mg-4Al-2Ba-2Ca (ABaX422) alloycitations
- 2013Microstructure and mechanical properties of as-cast Mg-Sn-Ca alloys and effect of alloying elementscitations
- 2013Microstructure investigation of Mg-10Gd-1La containing alloy subjected to fatigue deformation
- 2013Study of the Solidification of AS Alloys Combining In Situ Synchrotron Diffraction and Differential Scanning Calorimetrycitations
- 2013Microstructure, mechanical and corrosion properties of Mg-Dy-Gd-Zr alloys for medical applicationscitations
- 2013Crashworthiness of Magnesium Sheet Structurescitations
- 2013Effects of Sn segregation and precipitates on creep response of Mg-Sn alloyscitations
- 2013High temperature deformation of magnesium alloy TX32-0.4Al-0.8Si
- 2013Hot workability analysis with processing map and texture characteristics of as-cast TX32 magnesium alloycitations
- 2013Effect of internal defects on tensile properties of A356 casting alloys
- 2013In situ synchrotron diffraction of the solidification of Mg4Y3Ndcitations
- 2013Microstructure, Mechanical and Corrosion Properties of Mg-Gd-Zn Alloyscitations
- 2013Bulk and local textures of pure magnesium processed by rotary swagingcitations
- 2013A new magnesium alloy system: TEXAS
- 2013Influence of incorporating Si<inf>3</inf>N<inf>4</inf> particles into the oxide layer produced by plasma electrolytic oxidation on AM50 Mg alloy on coating morphology and corrosion propertiescitations
- 2013Effect of calcium addition on the hot working behavior of as-cast AZ31 a magnesium alloycitations
- 2013Acoustic Emission Study of Mg-Mn Extruded Alloys with Prospective Mechanical Properties
- 2013Microstructural approaches of engineering materials: Influences of Dy content and heat treatments on the formation of hydrides in Mg-Dy alloys
- 2013Addition of rare earth elements to MIM-processed Ti-6Al-4V
- 2013The role of sustainable process technologies in the development of advanced magnesium substances,Die Rolle nachhaltiger Prozesstechnologien bei der Entwicklung fortschrittlicher Maqnesium-Werkstoffe
- 2013Influence of temperature and rolling speed on twin roll cast stripcitations
- 2013General and Localized Corrosion of Magnesium Alloys: A Critical Reviewcitations
- 2013Fundamentals of magnesium alloy metallurgy: A volume in Woodhead Publishing Series in Metals and Surface Engineering
- 2012Microstructure and creep properties of MEZ magnesium alloy processed by thixocasting
- 2012Hot deformation behavior of Mg-2Sn-2Ca alloy in as-cast condition and after homogenizationcitations
- 2012Hot working mechanisms and texture development in Mg-3Sn-2Ca-0.4Al alloycitations
- 2012Antibacterial biodegradable Mg-Ag alloys
- 2012Microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy containing Ce
- 2012TEXTURE EVOLUTION DURING HOT DEFORMATION PROCESSING OF Mg-3Sn-2Ca-0.4Al ALLOYcitations
- 2012Ultrasonic stirring as a production process for nanoparticle reinforced magnesium alloys and the compression creep response of ZE10 reinforced with ceria nanoparticles
- 2012Metallurgical Characterization of Hot Tearing Curves Recorded during Solidification of Magnesium Alloyscitations
- 2012Polycrystalline and amorphous MgZnCa thin filmscitations
- 2012Deformation Microstructures and Textures of Cast Mg-3Sn-2Ca alloy under Uniaxial Hot Compression
- 2012Controlled degradation of a magnesium alloy in simulated body fluid using hydrofluoric acid treatment followed by polyacrylonitrile coatingcitations
- 2012Hot deformation mechanisms in AZ31 Magnesium Alloy Extruded at different temperatures: Impact of Texturecitations
- 2012Magnesium matrix composites: State-of the-art and what's the futurecitations
- 2012From titanium to magnesium: processing by advanced metal injection mouldingcitations
- 2012TNB-V5 alloy modification through elemental powder metallurgy
- 2011Properties and processing of magnesium-tin-calcium alloyscitations
- 2011Compressive strength and hot deformation behavior of TX32 magnesium alloy with 0.4% Al and 0.4% Si additionscitations
- 2011Preface
- 2011Macrostructure evolution in directionally solidified Mg-RE alloyscitations
- 2011Investigations on hot tearing of Mg-Zn-(Al) alloyscitations
- 2011Magnesium Permanent Mold Castings Optimizationcitations
- 2011Study on the interface of PVDF coatings and HF-treated AZ31 magnesium alloy: Determination of interfacial interactions and reactions with self-healing propertiescitations
- 2011Corrosion protection of magnesium AZ31 alloy using poly(ether imide) [PEI] coatings prepared by the dip coating method: Influence of solvent and substrate pre-treatmentcitations
- 2011Corrosion of magnesium in static and dynamic (bioreactor) systems
- 2011Compression creep at 240°C of extruded magnesium alloys containing gadoliniumcitations
- 2011Global Magnesium Research: State-of-the-Art and What's Next?
- 2011Effects of ceramic inoculants and intermetallic phases on hot rolled AZ magnesium wrought alloyscitations
- 2011Formability of magnesium sheet ZE10 and AZ31 with respect to initial texturecitations
- 2011Factors influencing magnesium corrosion in vitro - Environment, proteins and oxygen
- 2011In situ studies of light metals with synchrotron radiation and neutrons
- 2011Corrosion protection of magnesium AZ31 alloy using poly(ether imide) PEI coatings prepared by the dip coating method Influence of solvent and substrate pre-treatmentcitations
- 2011Influence of lanthanum concentration on the corrosion behaviour of binary Mg-La alloyscitations
- 2011Influence of composition on hot tearing in binary Mg-Zn alloyscitations
- 2010The role of anions in the formation and corrosion resistance of the plasma electrolytic oxidation coatingscitations
- 2010Effect of thermal and mechanical treatments on the hot working response of Mg-3Sn-1Ca alloycitations
- 2010Grain refinement of Mg-Al alloys by carbon inoculation
- 2010Texture and microstructure evolution in ultrafine-grained AZ31 processed by EX-ECAPcitations
- 2010High Cycle Fatigue Behaviour of Magnesium Alloyscitations
- 2010Investigations on Microstructure and Properties of Mg-Sn-Ca alloys with 3% Al additions
- 2010Influence of electrolyte constituents on corrosion behaviour of PEO coatings on magnesium alloyscitations
- 2010Interrupted creep behaviour of Mg alloys developed for powertrain applicationscitations
- 2010Magnesium secondary alloys: Alloy design for magnesium alloys with improved tolerance limits against impuritiescitations
- 2010Surface modification of magnesium alloy AZ31 by hydrofluoric acid treatment and its effect on the corrosion behaviourcitations
- 2010High Temperature Deformation Mechanisms and Processing Map for Hot Working of Cast-Homogenized Mg-3Sn-2Ca Alloycitations
- 2010Effect of Minor Additions of Al and Si on the Mechanical Properties of Cast Mg-3Sn-2Ca Alloys in Low Temperature Rangecitations
- 2010Effect of rare earth additions on microstructure and texture development of magnesium alloy sheetscitations
- 2010On the degradation mechanism of corrosion protective poly(ether imide) coatings on magnesium AZ31 alloycitations
- 2010Magnesium alloys as implant materials - Principles of property design for Mg-RE alloyscitations
- 2010Advanced Component Manufacture from Light Materials, International Conference on Materials for Advanced Technologies 2009 Prefacecitations
- 2010Approaching bolt load retention behaviour of AS41 through compliance and creep deformation
- 2010Corrosion of magnesium and its alloys
- 2010EFFECT OF ALUMINUM ADDITION ON THE STRENGTHENING AND HIGH TEMPERATURE DEFORMATION BEHAVIOR OF Mg-3Sn-2Ca ALLOY
- 2010Corrosion protection of magnesium alloy AZ31 sheets by spin coating process with poly(ether imide) [PEI]citations
- 2010Preventing galvanic corrosion - Systematic development of a magnesium car body component,Vermeidung von Bimetallkorrosion - Systematische Entwicklung eines Magnesium Karosseriebauteilscitations
- 2010Corrosion protection of magnesium alloy AZ31 sheets by spin coating process with poly(ether imide) PEIcitations
- 2010Rheological behaviour of semi-solid Mg-Y alloys
- 2010Effects of organic acid pickling on the corrosion resistance of magnesium alloy AZ31 sheetcitations
- 2010Bolt load retention and creep response of AS41 alloyed with 0.15% Ca
- 2010Preventing galvanic corrosion - Systematic development of a magnesium car body componentcitations
- 2009Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method
- 2009Elevated temperature and varied load response of AS41 at bolted joint
- 2009Optimum parameters and rate-controlling mechanisms for hot working of extruded Mg-3Sn-1Ca alloycitations
- 2009Magnesium recycling system prepared by permanent mould- and high pressure die casting
- 2009Microstructure and corrosion behavior of Mg-Sn-Ca alloys after extrusioncitations
- 2009Quantitative Determination on Hot Tearing in Mg-Al Binary Alloyscitations
- 2009Influence of inorganic acid pickling on the corrosion resistance of magnesium alloy AZ31 sheetcitations
- 2009Mechanical properties and corrosion performance of AZ-Mg alloy modified with Ca and Srcitations
- 2009Microstructural and mechanical aspects of reinforcement welds for lightweight components produced by friction hydro pillar processing
- 2009Hot tearing behaviour of binary Mg-1Al alloy using a contraction force measuring methodcitations
- 2009Mg sheet: The effect of process parameters and alloy composition on texture and mechanical propertiescitations
- 2009On the microstructure and texture development of magnesium alloy ZEK100 during rolling
- 2009Stress corrosion cracking behaviour of a surface modified magnesium alloy (vol 59, pg 43, 2008)
- 2009Comparison of Quasi-static and Cyclic Plastic Behaviour of a Wrought Magnesium Alloy
- 2009Magnesium recycling: State-of-the-art developments, part i
- 2009INFLUENCE OF ALLOYING ADDITIONS ON THE MICROSTRUCTURE DEVELOPMENT OF EXTRUDED MG-MN ALLOYS
- 2009Influence of strontium, silicon and calcium additions on the properties of the AM50 alloycitations
- 2009Magnesium recycling: State-of-the-Art developments, part II
- 2009The Role of Hydrogen in the Stress Corrosion Cracking of Mg-Al Alloys
- 2008Wrought magnesium alloys for structural applicationscitations
- 2008Effects of welding conditions on microstructural transformations and mechanical properties in AE42-HP friction welded jointscitations
- 2008Creep and hot working behavior of a new magnesium alloy Mg-3Sn-2Ca
- 2008Influence of processing route on the properties of magnesium alloys
- 2008Recycling of heat resistant magnesium alloys
- 2008Hot workability characteristics of cast and homogenized Mg-3Sn-1Ca alloycitations
- 2008Evolution of microstructure and hardness of AE42 alloy after heat treatmentscitations
- 2008Microstructure evolution and tensile properties of friction-stir-welded AM50 magnesium alloycitations
- 2008Stress corrosion cracking behaviour of a surface-modified magnesium alloycitations
- 2008Biomimetic techniques in tissue engineering bones and orthopaedics implants
- 2008Hot working parameters and mechanisms in as-cast Mg-3Sn-1Ca alloycitations
- 2008Stress Corrosion Cracking (SCC) in Mg-Al alloys studied using compact specimenscitations
- 2008An in vitro test for corrosion and cytocompatibility of two magnesium alloys
- 2008Study of the structure and corrosion behavior of PEO coatings on AM50 maginesium. alloy by electrochemical impedance spectroscopycitations
- 2008Fractography of stress corrosion cracking of mg-al alloyscitations
- 2008Comparison of the linearly increasing stress test and the constant extension rate test in the evaluation of transgranular stress corrosion cracking of magnesiumcitations
- 2008Characterisation of stress corrosion cracking (SCC) of Mg-Al alloyscitations
- 2008Phase equilibria, thermodynamics and solidification microstructures of Mg-Sn-Ca alloys, Part 2: Prediction of phase formation in Mg-rich Mg-Sn-Ca cast alloyscitations
- 2008A mechanistic understanding of stress corrosion cracking of Mg-Al alloys
- 2007Threshold stress during tensile and compressive creep in AE42 magnesium alloy
- 2007Development of a magnesium recycling alloy based on the AM alloy system
- 2007Stress corrosion cracking in magnesium alloys: Characterization and preventioncitations
- 2007Microstructure, corrosion and creep of as-cast magnesium alloys Mg-2Sn-2Ca and Mg-4Sn-2Ca
- 2007Effect of microstructural inhomogeneity on creep response of Mg-Sn alloys
- 2007Microstructural investigations of MG-AL alloys containing small amount of SiC nucleants
- 2007High temperature deformation behaviour of a new magnesium alloy
- 2007Creep behavior of AE42 based hybrid compositescitations
- 2007Effect of heat treatment on the microstructure and creep behavior of Mg-Sn-Ca alloys
- 2007Magnesium stress corrosion cracking
- 2007Electrochemical behavior of magnesium alloys in simulated body fluids
- 2007Microstructure and creep behaviour of magnesium hybrid compositescitations
- 2007Development of a magnesium recycling alloy based on AM50
- 2007Influence of heat treatment on damping behaviour of the magnesium wrought alloy AZ61citations
- 2007Thermal cycling behaviour of the magnesium alloy based hybrid composites in the transverse directioncitations
- 2007Evaluation of the delayed hydride cracking mechanism for transgranular stress corrosion cracking of magnesium alloyscitations
- 2007The influence of de-icing salts on corrosion of Mg-alloys
- 2007Effect of temperature on tensile properties of hot rolled AZ31 Mg alloy
- 2007Mechanical anisotropy of AZ31 magnesium alloy sheet investigated by the acoustic emission technique
- 2007New developments in extruded magnesium alloys for structural applications
- 2007Influence of aging on damping of the magnesium-aluminium-zinc seriescitations
- 2007Influence of process parameters on the mechanical properties of rolled magnesium ZM21-sheets
- 2007Microstructure Characterisation and Creep Properties of AE42 Based Hybrid Composites Prepared by Squeeze Casting Process
- 2007New perspectives for wrought magnesium alloys
- 2007Advances in manufacturing processes for magnesium alloys
- 2007Effect of temperature on tensile properties of hot rolled AZ31 Mg alloy sheets
- 2007Influence of alloying elements on the mechanical properties of zinc containing extruded magnesium alloys
- 2007Magnesium - future material for automotive industry?citations
- 2007Magnesium global development: Outcomes from the TMS 2007 annual meetingcitations
- 2006Investigations on thermal fatigue of aluminum- and magnesium-alloy based compositescitations
- 2006Microstructure and thermal response of Mg-Sn alloys
- 2006Hot rolling and deep drawing of AM50 sheet
- 2006The influence of the casting process on the creep properties of different AZ-based magnesium alloys
- 2006Preface
- 2006Characterization of stress in reinforcements in magnesium based squeeze infiltrated cast hybrid compositescitations
- 2006Effects of interfacial reactions during solidification on mechanical properties in short fiber reinforced AlSi12CuMgNi composites
- 2006Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loadingcitations
- 2006Low temperature hydrostatic extrusion of magnesium alloys
- 2006Basics of Metal Matrix Composites
- 2006The effect of grain size on the deformation behaviour of magnesium alloys investigated by the acoustic emission techniquecitations
- 2006Corrosion behavior and microstructure of a broad range of Mg-Sn-X alloys
- 2006Forming of magnesium alloys at 100°C by hydrostatic extrusioncitations
- 2006Forming of magnesium alloys at 100 degrees C by hydrostatic extrusioncitations
- 2006Metal Matrix Composites: Custom-made Materials for Automotive and Aerospace Engineeringcitations
- 2006Hydrostatic extrusion at 100 degrees C and its effect on the grain size and mechanical properties of magnesium alloyscitations
- 2006Influence of the copper content on microstructure and corrosion resistance of AZ91 based secondary magnesium alloyscitations
- 2006Vertical Direct Chill (VDC) casting of a novel magnesium wrought alloy with ZR and RE additions (ZK10): Alloying issues
- 2006Hydrostatic extrusion of commercial magnesium alloys at 100 degrees C and its influence on grain refinement and mechanical propertiescitations
- 2006Microstructural investigations of the Mg-Sn-xCa systemcitations
- 2006Enhancement of workability in AZ31 alloy - Processing maps: Part I, cast materialcitations
- 2006Review of studies on corrosion of magnesium alloyscitations
- 2006Powder Metallurgically Manufactured Metal Matrix Composites
- 2006Particles, Fibers and Short Fibers for the Reinforcement of Metal Materials
- 2006Intermetallics in magnesium alloyscitations
- 2005Analysis of instantaneous thermal expansion coefficient curve during thermal cycling in short fiber reinforced AlSi12CuMgNi compositescitations
- 2005Investigations in the magnesium-tin system
- 2005Microstructural investigations of interfaces in short fiber reinforced AlSi12CuMgNi compositescitations
- 2005Effect of particulate content on the thermal cycling behaviour of the magnesium alloy based hybrid compositescitations
- 2005Hot tearing of magnesium alloys
- 2005Microstructure and texture development during hydrostatic extrusion of magnesium alloy AZ31citations
- 2005Synchrotron radiation investigation of twinning in extruded magnesium alloy AZ31
- 2005Hydrostatic and indirect extrusion of AZ-magnesium alloys
- 2005Corrosion properties of secondary AZ91 alloys
- 2005Tensile and compressive creep behaviour of Al<inf>2</inf>O<inf>3</inf> (Saffil®) short fiber reinforced magnesium alloy AE42citations
- 2005Acoustic emission analysis of extruded AZ31 with varying grain size
- 2005Comparison of corrosion properties of squeeze cast and thixocast MgZnRE alloys
- 2005Thermal cycling and creep studies of AM50+Nd magnesium alloy based carbon fiber, SiC particulate and in-situ Mg2Si reinforced hybrid composites
- 2005Priority programme of the German research foundation: "Extending the range of applications for magnesium alloys"
- 2005The texture evolutions of Mg alloy, AZ31, under uni-axial loading
- 2005Dynamic strain ageing during stress relaxation in selected magnesium alloys containing rare earth elementscitations
- 2005Microstructural development in tension and compression creep of magnesium alloy AE42
- 2005Process and alloy development for hydrostatic extrusion of magnesium: The European Community research project MAGNEXTRUSCO
- 2005Thermal cycling and creep studies of AM50+Nd magnesium alloy based carbon fiber, SiC particulate and in-situ Mg<inf>2</inf>Si reinforced hybrid composites
- 2005Corrosion of AZ 91 secondary magnesium alloycitations
- 2005Magnesium wrought alloy properties of the AZ - Series
- 2005A critical review of the stress corrosion cracking (SCC) of magnesium alloyscitations
- 2005Tensile and compressive creep behaviour of Al2O3 (Saffil (R)) short fiber reinforced magnesium alloy AE42citations
- 2005Magnesium wrought alloy properties of the AZ-series
- 2005Damping measurements of the magnesium wrought alloys AZ31, AZ61 and AZ80 after indirect and hydrostatic extrusion
- 2004Thermal behavior of short fiber reinforced AlSi12CuMgNi piston alloyscitations
- 2004In situ measurements of texture variations during a tensile loading of Mg-alloy AM20 using synchrotron X-ray radiationcitations
- 2004The metallographical examination of magnesium alloys
- 2004Neutron diffraction study on the texture development during extrusion of magnesium alloy AZ31citations
- 2004Micro-strain induced by thermal cycling in short fiber reinforced AlSi12CuMgNi piston alloy and AE42 magnesium alloycitations
- 2004The metallographical examination of magnesium alloys,Metallographische Gefügeuntersuchungen von Magnesiumlegierungen
- 2004Measurement of crack induced damping of cast magnesium alloy AZ91citations
- 2004Automotive applications of magnesium and its alloys
- 2004Some studies on the thermal-expansion behavior of C-fiber, SiCp, and in-situ Mg2Si-reinforced AZ31 Mg alloy-based hybrid compositescitations
- 2004Fatigue of die-cast magnesium alloys
- 2004Tensile properties of hot rolled AZ31 Mg alloy sheets at elevated temperaturescitations
- 2004Fatigue of magnesium alloyscitations
- 2004Thermal cycling and creep studies of AM50+Nd magnesium alloy based carbon fiber, SiC particulate and IN-SITU Mg<inf>2</inf>Si reinforced hybrid composites
- 2004General and localized corrosion of magnesium alloys: A critical reviewcitations
- 2004Acoustic emission during tensile testing of magnesium AZ alloyscitations
- 2004Testing of general and localized corrosion of magnesium alloys: A critical reviewcitations
- 2004Orientation effects on acoustic emission during tensile deformation of hot rolled magnesium alloy AZ31citations
- 2004Analysing hysteresis and residual strains in thermal cycling curves of short fibre reinforced Mg-MMCscitations
- 2004Microstructural investigations of the Mg-Sn and Mg-Sn-Al alloy systems
- 2003Influence of heat treatment on microstructure of hot extruded AZ31citations
- 2003Corrosion behaviour of magnesium alloys with RE additions in sodium chloride solutionscitations
- 2003New development in magnesium technology for light weight structures in transportation industriescitations
- 2003Some studies on Mg alloy reinforced with ceramic discontinuous phases
- 2003Analysis of thermal cycling curves of short fibre reinforced Mg-MMCscitations
- 2003Influence of the thermomechanical treatment on the microstructure of magnesium alloy AZ31
- 2003Creep behaviour of magnesium monolithic alloys and compositescitations
- 2003Influence of rolling conditions on the microstructure and mechanical properties of magnesium sheet AZ31citations
- 2003Effect of thermal treatment on thermal expansion behaviour of magnesium alloy based hybrid compositescitations
- 2003Anisotropic properties of magnesium sheet AZ31citations
- 2003Thermal cycling of Mg-MMCscitations
- 2002Effect of thermal cycling on QE22+20 vol% short fibre MMCs
- 2002An evaluation of the creep characteristics of an AZ91 magnesium alloy composite using acoustic emissioncitations
- 2002First runs with the ORPHEUS dark matter detectorcitations
- 2002Acoustic emission generated during tensile deformation of an AZ31 magnesium sheet
- 2002Characteristics of thermal cycling in a magnesium alloy compositecitations
- 2002Effect of thermal cycling on QE22 + 20 vol% short fibre MMCs
- 2002Relationship between microstructure and mechanical properties in magnesium wrought alloy AZ31
- 2001Creep behaviour of Mg-RE alloys for automotive applications
- 2001The ORPHEUS dark matter experiment
- 2000Creep behaviour of a QE22-SiC particle reinforced composite investigated by acoustic emission and scanning electron microscopycitations
- 2000Moderne entwicklungen von legierungen für den leichtbau
- 2000Improvement of the phase transition homogeneity of superheated superconducting tin granulescitations
- 2000Creep of magnesium composites investigated by the acoustic emission technique
- 2000The ORPHEUS dark matter experimentcitations
Places of action
