• Marques, Carlos
• Pereira, Luis
• Paixao, Tiago
• Pinto, Joao Lemos
• Woyessa, Getinet
• Min, Rui
• Antunes, Paulo
• Bang, Ole

Abstract

In this paper, two configurations are presented for simultaneous measurement of strain and temperature by reducing the cross-section area in small regions of the fiber where the Bragg gratings were inscribed, to achieve dual sensitivity to strain and handle the cross-sensitivity to temperature of a single grating. Each configuration used a single Bragg grating inscribed in a 2-ring undoped poly (methyl methacrylate) microstructured polymer optical fiber (mPOF) with a pulsed Q-switched Nd:YAG laser system. To reduce the cross-section area, a femtosecond laser system was used to remove portions of the mPOF, creating micromachined slots in the fiber, with different lengths for each configuration. The result was the appearance of a second peak when strain is applied, with a higher strain sensitivity. The thermal, humidity and refractive index response of these gratings were analyzed, revealing a thermal sensitivity almost twice the value of a common Bragg grating inscribed in the same mPOF. The maximum root mean square errors obtained when both strain and temperature are applied in these grating devices were 52 με% and 0.675 °C, respectively. These results show that the method used to produce these devices could be a suitable and reliable option to fabricate very compact sensors to simultaneously measure strain and other parameters, such as temperature. Moreover, these devices may be used as phase-shift gratings since the position of the reflective peaks and their relative spectral separation may be modulated by applying strain to the optical fiber.

Topics

• impedance spectroscopy
• polymer
• phase