• Das, Tushar Kanti
• Smalcerz, Albert
• Mistewicz, Krystian
• Godzierz, Marcin
• Kim, Hoe Joon
• Masiuchok, Olha
• Hajra, Sugato
• Nowacki, Bartłomiej

Abstract

<jats:title>Abstract</jats:title><jats:p>The nanorods of bismuth sulfoiodide (BiSI) were synthesized at relatively low temperature (393 K) through a wet chemical method. The crystalline one-dimensional (1D) structure of the BiSI nanorods was confirmed using high resolution transmission microscopy (HRTEM). The morphology and chemical composition of the material were examined by applying scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. The average diameter of 126(3) nm and length of 1.9(1) µm of the BiSI nanorods were determined. X-ray diffraction (XRD) revealed that prepared material consists of a major orthorhombic BiSI phase (87%) and a minor amount of hexagonal Bi<jats:sub>13</jats:sub>S<jats:sub>18</jats:sub>I<jats:sub>2</jats:sub> phase (13%) with no presence of other residual phases. The direct energy band gap of 1.67(1)  eV was determined for BiSI film using diffuse reflectance spectroscopy (DRS). Two types of photodetectors were constructed from BiSI nanorods. The first one was traditional photoconductive device based on BiSI film on stiff glass substrate equipped with Au electrodes. An influence of light intensity on photocurrent response to monochromatic light (λ = 488 nm) illumination was studied at a constant bias voltage. The novel flexible photo-chargeable device was the second type of prepared photodetectors. It consisted of BiSI film and gel electrolyte layer sandwiched between polyethylene terephthalate (PET) substrates coated with indium tin oxide (ITO) electrodes. The flexible self-powered BiSI photodetector exhibited open-circuit photovoltage of 68 mV and short-circuit photocurrent density of 0.11 nA/cm<jats:sup>2</jats:sup> under light illumination with intensity of 0.127 W/cm<jats:sup>2</jats:sup>. These results confirmed high potential of BiSI nanorods for use in self-powered photodetectors and photo-chargeable capacitors.</jats:p>

Topics

• density
• phase
• scanning electron microscopy
• x-ray diffraction
• glass
• glass
• chemical composition
• Energy-dispersive X-ray spectroscopy
• tin
• one-dimensional
• Indium
• Bismuth