• Delannay, Francis
• Marchal, Y.
• Pardoen, Thomas

Abstract

The essential work of fracture (EWF) and the J-integral methods were applied in a study of the effect of the thickness on the cracking resistance of thin plates. The paper discusses two themes: (1) the relationships between the two methods or concepts is elucidated, and (2) a new, thickness independent plane stress toughness parameter is proposed. For that purpose, cracked aluminium 60820 thin plates of 1-6 mm thickness were tested in tension until final separation. The EWF, w(e), and the J-integral at cracking initiation, J(i), increase identically with thickness except at larger thickness for which the increase of J(i) levels off. J(i) reaches a maximum for 5-6 mm thickness whereas w(e) keeps increasing linearly with thickness. This difference is related to the more progressive development of the necking zone in front of the crack tip when thickness increases: at large thickness, cracking initiates well before the neck has developed to its stationary value during propagation. A linear regression on the fracture toughness/thickness curve allows partitioning the two contributions of the work of fracture: the plastic work per unit area for crack tip necking and a plane stress work per unit area for material separation. The pertinence of this new measure of the pure plane stress cracking resistance is critically discussed based on a micromechanical model for ductile fracture. The micromechanical void growth model incorporates void shape effects, which is essential in the low stress triaxiality regime. (C) 2002 Elsevier Science Ltd. All rights reserved.

Topics

• impedance spectroscopy
• polymer
• aluminium
• crack
• void
• fracture toughness